Enhancement of biocompatibility of anodic nanotube structures on biomedical Ti–6Al–4V alloy via ultrathin TiO2 coatings
Open Access
- 2 December 2024
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Bioengineering and Biotechnology
- Vol. 12, 1515810
Abstract
This work aims to describe the effect of the surface modification of TiO2 nanotube (TNT) layers on Ti-6Al-4V (TiAlV) alloy by ultrathin TiO2 coatings prepared via Atomic Layer Deposition (ALD) on the growth of MG-63 osteoblastic cells. The TNT layers with two distinctly different inner diameters, namely ∼15 nm and ∼50 nm, were prepared via anodic oxidation of the TiAlV alloy. Flat, i.e., non-anodized, TiAlV alloy foils were used as reference substrates. Additionally, a part of the TNT layers and alloy foils was coated with ultrathin coatings of TiO2 by ALD. The number of TiO2 ALD cycles used was 1 and 5 leading to a nominal TiO2 thickness of ∼0.055 and ∼0.3 nm, respectively. The ultrathin TiO2 coating by ALD enabled to optimize the surface hydrophilicity for optimal cell growth. In addition, coatings shaded impurities of V- and F-based species (stemming from the alloy and the anodization electrolyte) that affect the biocompatibility of the tested materials while preserving the original structure and morphology. The evaluation of the biocompatibility before and after TiO2 ALD coating on TiAlV flat surfaces and TNT layers was carried out using MG-63 osteoblastic cells and compared after incubation for up to 96 h. The cell growth, adhesion, and proliferation of the MG-63 on TiAlV foils and TNT layers showed significant enhancement after the surface modification by TiO2 ALD.Keywords
This publication has 70 references indexed in Scilit:
- The Role of Titania Surface Coating by Atomic Layer Deposition in Improving Osteogenic Differentiation and Hard Tissue Formation of Dental Pulp Stem CellsAdvanced Engineering Materials, 2021
- Effects of controlled micro‐/nanosurfaces on osteoblast proliferationJournal of Biomedical Materials Research Part A, 2017
- Contact Angle and Wetting Properties2013
- TiO2 Nanotubes: Synthesis and ApplicationsAngewandte Chemie International Edition, 2011
- Corrosion resistance of Ti‐6Al‐4V alloy after diverse surface treatmentsMaterialwissenschaft und Werkstofftechnik, 2010
- TiO2 Nanotube Surfaces: 15 nm—An Optimal Length Scale of Surface Topography for Cell Adhesion and DifferentiationSmall, 2009
- Formation of Double‐Walled TiO2 Nanotubes and Robust Anatase MembranesAdvanced Materials, 2008
- Corrosion degradation and prevention by surface modification of biometallic materialsJournal of Materials Science: Materials in Medicine, 2006
- Self‐organized nanotubular oxide layers on Ti‐6Al‐7Nb and Ti‐6Al‐4V formed by anodization in NH4F solutionsJournal of Biomedical Materials Research Part A, 2005
- Varying Ti‐6Al‐4V surface roughness induces different early morphologic and molecular responses in MG63 osteoblast‐like cellsJournal of Biomedical Materials Research Part A, 2005