P-type (CuTi)Ox Thin Films Deposited by Magnetron Co-Sputtering and Their Electronic and Hydrogen Sensing Properties

Authors:
Open Access
Publisher website
Google Scholar
Abstract
Thin films of copper oxide (CuxO), titanium oxide (TiOx), and several mixtures of copper and titanium oxides ((CuTi)Ox) were deposited using magnetron sputtering. X-ray diffraction analysis of the as-deposited TiOx thin film revealed the presence of TiO crystallites, while in the case of (CuTi)Ox with the lowest amount of copper, metallic Cu crystallites were found. In the case of (Cu0.77Ti0.23)Ox and CuxO thin films, characteristic peaks for metallic copper and copper oxides were observed in their diffractograms. It was found that post-process annealing at 473 K considerably affects the microstructure of (CuTi)Ox thin films. After annealing, anatase phase was observed in (Cu0.23Ti0.77)Ox and (Cu0.41Ti0.59)Ox thin films. In turn, the (Cu0.77Ti0.23)Ox and CuxO films were formed only in the copper oxide phase. The (Cu0.77Ti0.23)Ox film annealed at 473 K showed the best opto-electronic performance, as it had the highest transmission and the lowest resistivity. However, the greatest advantage of this thin film was the p-type semiconducting behavior, which was the strongest of all of the thin films in this work, as indicated by the measurement of the Seebeck coefficient. All deposited thin films were sensitive to hydrogen exposure, while the best sensor response of 10.9 was observed for the (Cu0.77Ti0.23) Ox thin film annealed at 473 K.
Funding Information
  • Narodowe Centrum Nauki (UMO-2018/29/B/ST8/00548, UMO-2020/39/D/ST5/00424)

This publication has 60 references indexed in Scilit: