Seismic performance of a steel moment frame subassembly tested from the onset of damage through collapse
- 20 April 2016
- journal article
- research article
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 45 (10) , 1563-1580
Abstract
Summary: A series of seismic tests were conducted on a 1½‐bay by 1½‐story special steel moment‐resisting frame subassembly from the onset of damage through incipient collapse. These tests were conducted using hybrid simulation with substructuring as a mean to demonstrate efficient testing methods for system‐level collapse assessment of large‐scale structural subassemblies. The ½‐scale specimen was designed to capture the behavior and interactions of beams, columns, panel zones, and composite floor slab. The experimental test setup permitted the application of lateral as well as varying vertical forces on the test specimen while maintaining realistic boundary conditions on the subassembly. With the overarching objective to advance knowledge on the collapse assessment of frame structures under earthquake loading, this paper focuses on the seismic performance of a steel moment‐resisting frame through collapse. The failure mechanisms of the test frame are described and compared with numerical simulations based on state‐of‐the‐art modeling approaches. Copyright © 2016 John Wiley & Sons, Ltd.Keywords
Funding Information
- National Science Foundation (CMMI‐0748111)
This publication has 24 references indexed in Scilit:
- Large-Scale Hybrid Simulation of a Steel Moment Frame Building Structure through CollapseJournal of Structural Engineering, 2016
- Development and Utilization of Structural Component Databases for Performance-Based Earthquake EngineeringJournal of Structural Engineering, 2013
- Collapse Assessment of Steel Moment Frames Based on E-Defense Full-Scale Shake Table Collapse TestsJournal of Structural Engineering, 2013
- Deterioration Modeling of Steel Components in Support of Collapse Prediction of Steel Moment Frames under Earthquake LoadingJournal of Structural Engineering, 2011
- Performance evaluation of a distributed hybrid test framework to reproduce the collapse behavior of a structureEarthquake Engineering & Structural Dynamics, 2011
- Prediction and validation of sidesway collapse of two scale models of a 4‐story steel moment frameEarthquake Engineering & Structural Dynamics, 2010
- Methods to Assess the Seismic Collapse Capacity of Building Structures: State of the ArtJournal of Structural Engineering, 2007
- Test on full-scale three-storey steel moment frame and assessment of ability of numerical simulation to trace cyclic inelastic behaviourEarthquake Engineering & Structural Dynamics, 2005
- Seismic Response of Composite Moment-Resisting Connections. I: PerformanceJournal of Structural Engineering, 1998
- Cyclic Tests of Full‐Scale Composite Joint SubassemblagesJournal of Structural Engineering, 1989