Fine-Grained FeCoNi(CuAl)x High Entropy Alloys: Phase Transformation, Microstructure Evolution and Mechanical Properties
Authors:
Open Access
- 29 October 2020
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Materials
- Vol. 7
Abstract
A series of fine-grained FeCoNi(CuAl)x (x=0, 0.4, 0.6, 0.8, 1.0) medium-entropy alloy (MEA) and high-entropy alloys (HEAs) were fabricated by Mechanical Alloying (MA) and Spark Plasma Sintering (SPS). The effect of Al and Cu content (x) on phase composition, microstructure and mechanical properties of the alloys was investigated. Experimental results show that the crystal structure of FeCoNi(CuAl)x alloy transforms from single FCC phase for x=0 to FCC+BCC duplex phases for x=0.4~1.0, with the fraction of BCC phase gradually increasing with the increase of x. Adding a low content of Al and Cu elements to FeCoNi alloy can significantly hinder the grain growth during sintering process, the average grain size of FCC phase decreases from 0.95 to 0.30 µm at x=0.4. However, the grain sizes of FCC and BCC phases gradually grow up when x increases from 0.4 to 1.0. The variation in grain size indicates that the atomic diffusion rate of sintered alloy may be influenced by the sluggish diffusion effect in HEA as well as the content of Al and Cu with lower melting points. Mechanical properties of the HEAs are mainly affected by the volume fraction of BCC phase. The compressive yield strength and hardness of HEAs are improved at first and then slightly reduced, while the plasticity drops down continuously with the increase of x. The bulky HEA achieved excellent comprehensive mechanical properties with a compressive yield strength of 1467.7 MPa and plastic strain to failure of 24.9 % at x=0.6, due to the fine duplex microstructure.Keywords
This publication has 43 references indexed in Scilit:
- Effect of annealing treatment on microstructures and mechanical properties of FeCoNiCuAl high entropy alloysMaterials Science and Engineering: A, 2013
- Effect of elemental interaction on microstructure and mechanical properties of FeCoNiCuAl alloysMaterials Science and Engineering: A, 2012
- Alloy Design and Properties Optimization of High-Entropy AlloysJOM, 2012
- Phase stability in high entropy alloys: Formation of solid-solution phase or amorphous phaseProgress in Natural Science: Materials International, 2011
- Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloysIntermetallics, 2011
- Synthesis and characterization of FeCoNiCrCu high-entropy alloy coating by laser claddingMaterials & Design (1980-2015), 2011
- Effect of aluminum contents on microstructure and properties of AlxCoCrFeNi alloysJournal of Alloys and Compounds, 2010
- On the elemental effect of AlCoCrCuFeNi high-entropy alloy systemMaterials Letters, 2007
- Microstructure characterization of Alx CoCrCuFeNi high-entropy alloy system with multiprincipal elementsMetallurgical and Materials Transactions A, 2005
- X-ray line broadening from filed aluminium and wolframActa Metallurgica, 1953