Nanofabrication of Isoporous Membranes for Cell Fractionation
Open Access
- 9 April 2020
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 10 (1) , 1-9
Abstract
Cell fractionations and other biological separations frequently require several steps. They could be much more effectively done by filtration, if isoporous membranes would be available with high pore density, and sharp pore size distribution in the micro- and nanoscale. We propose a combination of two scalable methods, photolithography and dry reactive ion etching, to fabricate a series of polyester membranes with isopores of size 0.7 to 50 μm and high pore density with a demonstrated total area of 38.5 cm2. The membranes have pore sizes in the micro- and submicro-range, and pore density 10-fold higher than track-etched analogues, which are the only commercially available isoporous polymeric films. Permeances of 220,000 L m−2 h−1bar−1 were measured with pore size 787 nm. The method does not require organic solvents and can be applied to many homopolymeric materials. The pore reduction from 2 to 0.7 μm was obtained by adding a step of chemical vapor deposition. The isoporous system was successfully demonstrated for the organelle fractionation of Arabidopsis homogenates and could be potentially extended to other biological fractionations.Keywords
This publication has 33 references indexed in Scilit:
- Thinking the future of membranes: Perspectives for advanced and new membrane materials and manufacturing processesJournal of Membrane Science, 2020
- Highly Selective Vertically Aligned Nanopores in Sustainably Derived Polymer Membranes by Molecular TemplatingACS Nano, 2017
- Block Copolymer Membranes for Aqueous Solution ApplicationsMacromolecules, 2016
- Towards hierarchically ordered functional porous polymeric surfaces prepared by the breath figures approachProgress in Polymer Science, 2014
- Breath Figure Arrays: Unconventional Fabrications, Functionalizations, and ApplicationsAngewandte Chemie International Edition, 2013
- Hierarchically Structured Assembly of Polymer Microsieves, made by a Combination of Phase Separation Micromolding and Float‐CastingAdvanced Materials, 2012
- Ordered Microporous Membranes Templated by Breath Figures for Size-Selective SeparationJournal of the American Chemical Society, 2011
- A Method for Reproducibly Preparing Synthetic Nanopores for Resistive‐Pulse BiosensorsSmall, 2007
- Plugging by hydrodynamic bridging during flow of stable colloidal particles within cylindrical poresJournal of Fluid Mechanics, 1999
- Particle Track EtchingScience, 1972