Characterization of Iron Aluminide Diffusion Coatings Obtained after Friction Surfacing
Open Access
Abstract
Iron aluminides are considered as candidate materials for high temperature applications for their excellent high temperature corrosion and oxidation resistance. In the present work, iron-aluminide coatings were developed by friction surfacing (6351 aluminum alloy deposited on a low-carbon steel substrate) followed by a diffusion heat treatment. The initial coatings were found to be geometrically homogenous and adhered well to the steel substrate. The heat treatment process was carried out at 550 °C for 48, 72 and 96 h and the resulting coatings were characterized in terms of microstructure, chemical composition, hardness distribution and phase composition. After heat treatment, the coating/substrate interface morphology was modified and presented patterns typical of Fe-Al intermetallic formation, as well as a substantial increase in hardness (>900 HV) relative to the initial as-deposited condition. With the diffusion treatment, initially Fe2Al5 was found to develop in the coatings, which was converted into FeAl2 after longer exposures.Keywords
Funding Information
- Coordination for the Improvement of Higher Education Personnel—Brazil (CAPES) (001, PPM-00662-18)
- FAPEMIG (001, PPM-00662-18)
This publication has 44 references indexed in Scilit:
- Oxide scale formation of modified FeCrAl coatings exposed to liquid leadCorrosion Science, 2012
- On the formation and growth of intermetallic phases during interdiffusion between low-carbon steel and aluminum alloysActa Materialia, 2011
- Friction surfaced tool steel (H13) coatings on low carbon steel: A study on the effects of process parameters on coating characteristics and integritySurface and Coatings Technology, 2010
- Transferring mechanism of the coating rod in friction surfacingSurface and Coatings Technology, 2008
- Growth behavior of Fe2Al5 during reactive diffusion between Fe and Al at solid-state temperaturesMaterials Science and Engineering: A, 2007
- Reactive diffusion in the roll bonded iron–aluminum systemMaterials Letters, 2006
- Deposition and corrosion resistance of HVOF sprayed nanocrystalline iron aluminide coatingsSurface and Coatings Technology, 2005
- Control of intermetallic compound layers at interface between steel and aluminum by diffusion-treatmentMaterials Science and Engineering: A, 2002
- The influence of microstructure on the ductility of iron aluminidesIntermetallics, 1999
- On the characteristics of the rotational contact plane ‐ a fundamental study of friction surfacingWelding International, 1996