Safety Performance of Asymmetric Windshields
Authors:
- Paul WeigtPWPaul Weigt
- L. M. PatrickLPL. M. Patrick
- 1 February 1978
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
A comparative study of the safety performance of asymmetric and standard HPR windshields was conducted. The effect of increased interlayer thickness was also quantified. There were four different types of asymmetric windshields which had inner layer thicknesses of 0.8 to 1.5 mm and interlayer thicknesses of 0.76 and 1.14 mm. The experimental program consisted of both full scale sled tests and headform drop tests. A total of 127 vehicular impacts were carried out using a modified Volkswagen Rabbit. The test subject was a 50th percentile Fart 572 anthropomorphic test device. The asymmetric windshields were found to have a lower lacerative potential than that of the standard windshield. The best TLI value of 5.2 was provided by a 0.8 - 0.76 mm windshield at 60 km/h. That for the standard windshield was 7.7 at the same speed. All HIC values were less than 1,000 at 48 km/h. The drop tests were designed to study head injury potential at velocities below 30 km/h at which the windshield may not fracture. The HIC value for standard windshields was found to be as high as 800 without fracture. Tempering of such windshields can increase the hazard. Non-fractured asymmetric windshields did not exhibit dangerous HIC values.Keywords
This publication has 12 references indexed in Scilit:
- Safety Performance of Securiflex WindshieldSAE International Journal of Advances and Current Practices in Mobility, 1976
- Efficiency of Phantom Impact Test in Safety Glass TestingSAE International Journal of Advances and Current Practices in Mobility, 1974
- Improved Laminated Windshield with Reduced Laceration PropertiesSAE International Journal of Advances and Current Practices in Mobility, 1973
- The Quantification of Internal Head Injury by Means of the Phantom Head and the Impact Assessment MethodsSAE International Journal of Advances and Current Practices in Mobility, 1971
- Low Velocity Impacts and Temperature Sensitivity of Automotive WindshieldsSAE International Journal of Advances and Current Practices in Mobility, 1971
- Safety Performance of Laminated Glass StructuresSAE International Journal of Advances and Current Practices in Mobility, 1970
- An Improved WindshieldSAE International Journal of Advances and Current Practices in Mobility, 1970
- Safety Performance of a Chemically Strengthened WindshieldSAE International Journal of Advances and Current Practices in Mobility, 1969
- Development of a Safer Nonlacerating Automobile WindshieldSAE International Journal of Advances and Current Practices in Mobility, 1969
- A New High-Safety Glazing for Automobiles and Other VehiclesSAE International Journal of Advances and Current Practices in Mobility, 1968