Investigation of Load Environment and Bending Load Capacities of Aged Prestressed Concrete Sleepers
Open Access
- 3 July 2023
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 13 (13) , 7828
Abstract
In this study, field measurements of the bending moments of prestressed concrete (PC) sleepers installed on commercial lines were obtained, and numerical analyses to identify the effects of different parameters on their bending moments were conducted. The bending load capacities of aged PC sleepers collected from commercial lines via bending tests were also determined. According to the field measurement results of the wheel loads and bending moments of the PC sleepers, the measured values were smaller than the design values. In addition, neither the wheel load nor the bending moment depended on train speed. The numerical analysis results indicate that the positive bending moment at the rail seat section is unlikely to exceed the design decompression moment (DDM). However, the negative bending moment at the center section may exceed the DDM if center support is provided with a reduced spring constant under the rail (the “hanging” rail seat section). In addition, the bending moment increased with the rail surface roughness, so the rail should be kept smooth. Moreover, the results of the JIS E 1201 bending tests on the aged PC sleepers showed that the crack generation load and ultimate load decreased gradually with increases in age and passing tonnage. However, all samples satisfied the JIS standard values. Furthermore, the bending moments generated in the PC sleepers during train passage were considerably smaller than the crack generation load and ultimate load during the bending test. Thus, Japanese PC sleepers aged more than 50 years currently satisfy the standard flexural fracture values specified by the JIS, and safety is not immediately compromised.Keywords
This publication has 19 references indexed in Scilit:
- Assessment of sleeper support conditions using micro-tremor analysisProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2016
- Numerical and experimental study on dynamic behaviour of concrete sleeper track caused by wheel flatInternational Journal of Rail Transportation, 2015
- Introducing a New Limit States Design Concept to Railway Concrete Sleepers: An Australian ExperienceFrontiers in Materials, 2014
- Numerical Study of Impact Forces on Railway Sleepers under Wheel FlatAdvances in Structural Engineering, 2013
- Reliability-based conversion of a structural design code for railway prestressed concrete sleepersProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2011
- Simulation of a Shinkansen train on the railway structure during an earthquakeJapan Journal of Industrial and Applied Mathematics, 2011
- A review of loading conditions for railway track structures due to train and track vertical interactionStructural Control and Health Monitoring, 2008
- Investigation of free vibrations of voided concrete sleepers in railway track systemProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2007
- Simulation and visualization of a high-speed Shinkansen train on the railway structureJapan Journal of Industrial and Applied Mathematics, 2000
- A STUDY ON LIMIT STATE DESIGN METHOD FOR PRESTRESSED CONCRETE SLEEPERSDoboku Gakkai Ronbunshu, 1997