Stable Inverted Low-Bandgap Polymer Solar Cells with Aqueous Solution Processed Low-Temperature ZnO Buffer Layers
Open Access
- 1 January 2016
- journal article
- research article
- Published by Wiley in International Journal of Photoenergy
- Vol. 2016, 1-7
Abstract
Efficient inverted low-bandgap polymer solar cells with an aqueous solution processed low-temperature ZnO buffer layer have been investigated. The low-bandgap material PTB-7 is employed so that more solar light can be efficiently harvested, and the aqueous solution processed ZnO electron transport buffer layer is prepared at 150°C so that it can be compatible with the roll-to-roll process. Power conversion efficiency (PCE) of the inverted device reaches 7.12%, which is near the control conventional device. More importantly, the inverted device shows a better stability, keeping more than 90% of its original PCE after being stored for 625 hours, while PCE of the conventional device is only 75% of what it was. In addition, it is found that the ZnO thin film annealed in N2can obviously increase PCE of the inverted device further to 7.26%.Keywords
Funding Information
- National Natural Science Foundation of China (61334002, 61106063, JB141106)
- National Natural Science Foundation of China (61334002, 61106063, JB141106)
- Fundamental Research Funds for the Central Universities (61334002, 61106063, JB141106)
This publication has 30 references indexed in Scilit:
- 10.4% Power Conversion Efficiency of ITO‐Free Organic Photovoltaics Through Enhanced Light Trapping ConfigurationAdvanced Energy Materials, 2015
- Efficient inverted polymer solar cells employing favourable molecular orientationNature Photonics, 2015
- Amine‐Based Interfacial Molecules for Inverted Polymer‐Based Optoelectronic DevicesAdvanced Materials, 2015
- Solution-Processed Organic Solar Cells Based on Dialkylthiol-Substituted Benzodithiophene Unit with Efficiency near 10%Journal of the American Chemical Society, 2014
- Semi-crystalline photovoltaic polymers with efficiency exceeding 9% in a ∼300 nm thick conventional single-cell deviceEnergy & Environmental Science, 2014
- Efficient “Light-soaking”-free Inverted Organic Solar Cells with Aqueous Solution Processed Low-Temperature ZnO Electron Extraction LayersACS Applied Materials & Interfaces, 2013
- Enhanced power-conversion efficiency in polymer solar cells using an inverted device structureNature Photonics, 2012
- Stability of Polymer Solar CellsAdvanced Materials, 2011
- Polymer solar cells with enhanced open-circuit voltage and efficiencyNature Photonics, 2009
- Polymer Photovoltaic Cells: Enhanced Efficiencies via a Network of Internal Donor-Acceptor HeterojunctionsScience, 1995