Band alignment and defect engineering in lead-free MASnI 3 /chalcogenide perovskite double-absorber solar cells: a comparative SCAPS-1D study
- 4 November 2026
- journal article
- Published by IOP Publishing in Physica Scripta
- Vol. 101 (44) , 445508
Abstract
Lead-free perovskite solar cells have attracted increasing attention as potential candidates for sustainable photovoltaic applications. In this work, a fully lead-free double-absorber solar cell is proposed by integrating MASnI 3 as the primary absorber with four selenide-based chalcogenide perovskites (CPs), namely BaHfSe 3 , CaHfSe 3 , BaZrSe 3 , and CaZrSe 3 , as complementary secondary absorbers. The FTO/Zn 2 SnO 4 /MASnI 3 /CP/Cu 2 O/Au architecture is systematically investigated using SCAPS-1D through band-alignment, thickness, resistive-loss, doping, bulk-defect, and interface-defect analyses. The results reveal distinct photovoltaic responses between the Hf and Zr-based CPs, highlighting the important influence of interfacial band alignment. The thickness-optimized MASnI 3 /CaHfSe 3 and MASnI 3 /BaHfSe 3 configurations yield simulated power conversion efficiency of 27.42% and 27.36%, respectively, compared with 25.47% for the thickness-optimized MASnI 3 single-absorber reference, whereas the Zr-based configurations exhibit lower simulated efficiencies. Non-ideal parameter analyses further demonstrate that device performance is strongly influenced by resistive losses and defect-assisted recombination. For the investigated Hf-based configurations, the bulk-defect density of MASnI 3 has a greater influence than that of the secondary CP absorber, while the MASnI 3 /CP heterojunction is identified as the most defect-sensitive interface. Overall, the results identify CaHfSe 3 and BaHfSe 3 as the more promising secondary absorbers and demonstrate that double-absorber performance is governed by absorber selection, interfacial band alignment, and defect-assisted recombination. These findings provide a theoretical basis for further experimental investigation of fully lead-free MASnI 3 /selenide-CP double-absorber solar cells.Keywords
This publication has 50 references indexed in Scilit:
- High‐Efficiency Lead‐Free Hybrid Perovskite Solar Cells Integrating (FA) 2 BiCuI 6 and MASnI 3 for Broad‐Spectrum Light HarvestingProgress in Photovoltaics: Research and Applications, 2025
- Solar Cell Efficiency Tables (Version 66)Progress in Photovoltaics: Research and Applications, 2025
- Mathematical Modeling and performance analysis of Zr-Based chalcogenide perovskites with kesterite and zinc based charge transport layersInorganic Chemistry Communications, 2025
- A theoretical investigation into the impact of temperature and band gap variation of La2NiMnO6 oxide double perovskite nanostructures on the performance of La2NiMnO6/MASnI3 based hybrid solar cellsJournal of Physics and Chemistry of Solids, 2024
- Recent Progress in Lead Free Tin‐Halide Perovskite Materials Based Solar Cells via SCAPS Based Numerical SimulationChemistrySelect, 2024
- Design of MASnI3 perovskite solar cell with chalcogenide ETLs to achieve high photo conversion efficiency of 31.51% using SETFOSOptik, 2023
- Ligand Engineering in Tin-Based Perovskite Solar CellsNano-Micro Letters, 2023
- Interfacial engineering in lead-free tin-based perovskite solar cellsJournal of Energy Chemistry, 2021
- Numerical analysis of interface properties effects in CdTe/CdS:O thin film solar cell by SCAPS-1DIndian Journal of Physics, 2019
- A modeled perovskite solar cell structure with a Cu2O hole-transporting layer enabling over 20% efficiency by low-cost low-temperature processingJournal of Physics and Chemistry of Solids, 2019