Optimization of Alkali Treatment Process Parameters for Kenaf Fiber: Experiments Design
- 24 December 2020
- journal article
- research article
- Published by Taylor & Francis in Journal of Natural Fibers
- Vol. 19 (11) , 4276-4285
Abstract
Alkali treatment of natural fibers will improve the mechanical, chemical, and thermal characteristics of natural fiber reinforced epoxy composites. The influence of alkali treatment on the improvement of mechanical strength of natural fiber reinforced epoxy composites depends on the selection of process parameters of the treatment. In this work, the optimization of four key process parameters for alkali treatment of kenaf fiber has been studied using orthogonal array-oriented fractional factorial experimental design. The concentration of sodium hydroxide solution, process temperature, time, and fiber to solution weight ratio were the four chosen parameters and the tensile strength of the composite sample fabricated with treated kenaf fiber and epoxy resin was taken as output response. The hand layup method was used to fabricate the composite materials, and specimens were prepared for the tensile test. All samples were fabricated by ensuring the fiber weight ratio of 40%. Five samples were prepared at each experiment category, and mean values were taken for analysis. The results revealed that 6% NaOH solution, 30°C process temperature, 8 hours process time, and 1:15 fiber to solution weight ratio are identified as optimum process parameters for a tensile strength of 58.16 MPa.Keywords
This publication has 31 references indexed in Scilit:
- Alkali and Silane Treatments towards Exemplary Mechanical Properties of Kenaf and Pineapple Leaf Fibre-reinforced CompositesJournal of Bionic Engineering, 2020
- Characterization of Natural Fibers from Cortaderia Selloana Grass (Pampas) as Reinforcement Material for the Production of the CompositesJournal of Natural Fibers, 2020
- Extraction and characterization of vetiver grass (Chrysopogon zizanioides) and kenaf fiber (Hibiscus cannabinus) as reinforcement materials for epoxy based composite structuresJournal of Materials Research and Technology, 2020
- Impact of chemical treatment on the physiochemical and mechanical properties of kenaf fibersIndustrial Crops and Products, 2019
- Green composites: A review of adequate materials for automotive applicationsComposites Part B: Engineering, 2013
- The effects of alkali–silane treatment on the tensile and flexural properties of short fibre non-woven kenaf reinforced polypropylene compositesComposites Part A: Applied Science and Manufacturing, 2012
- Kenaf fiber reinforced composites: A reviewMaterials & Design (1980-2015), 2011
- Natural fibre-reinforced composites for bioengineering and environmental engineering applicationsComposites Part B: Engineering, 2009
- Effect of Fiber Surface Modification on the Interfacial and Mechanical Properties of Kenaf Fiber-Reinforced Thermoplastic and Thermosetting Polymer CompositesComposite Interfaces, 2009
- A study of the mechanical properties of short natural-fiber reinforced compositesComposites Part B: Engineering, 2005