Cure Cycle Effect on Composite Structures Manufactured by Resin Transfer Molding
Authors:
- 1 July 2002
- journal article
- research article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 36 (14) , 1725-1743
Abstract
An experimental investigation was conducted of the effect of curing cycle on the development of material properties, residual strains and stresses in composite parts during the resin transfer molding (RTM) process. The material investigated consisted of AS4 carbon fibers as the preform anda three-part epoxy system. Unidirectional and crossply carbon/epoxy laminates were prepared by the RTM process in aluminum molds. Several different curing cycles were designed by changing the peak cure temperature andheat up rate basedon a cure kinetic model. Strains were measured in the composite laminates during curing using embedded fiber optic strain sensors andelectrical resistance strain gages. It was foundthat significant strain was developed by interference between composite and mold during cure, resulting in constraint-induced strain. The magnitude of residual stresses was also assessedby measuring the warpage curvature of asymmetric cross ply laminates. The data showed that the residual stress was significantly dependent on the cure cycle andthe interference.Keywords
This publication has 7 references indexed in Scilit:
- An experimental investigation on mechanisms for manufacturing induced shape distortions in homogeneous and balanced laminatesComposites Part A: Applied Science and Manufacturing, 2001
- Prediction of springforward in continuous-fibre/polymer L-shaped partsComposites Part A: Applied Science and Manufacturing, 1998
- An Embedded Fiber Optic Sensor Method for Determining Residual Stresses in Fiber-Reinforced Composite MaterialsJournal of Intelligent Material Systems and Structures, 1998
- In-situprocess and condition monitoring of advanced fibre-reinforced composite materials using optical fibre sensorsSmart Materials and Structures, 1998
- A Study on the Room-Temperature Curvature Shapes of Unsymmetric Laminates Including Slippage EffectsJournal of Composite Materials, 1998
- CURE-DEPENDENT VISCOELASTIC RESIDUAL STRESS ANALYSIS OF FILAMENT-WOUND COMPOSITE CYLINDERSMechanics of Advanced Materials and Structures, 1998
- Effects of Processing Temperature and Layup on SpringbackJournal of Composite Materials, 1995