Compact and High-Performance TCAM Based on Scaled Double-Gate FeFETs
Authors:
- 9 July 2023
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 67, 1-6
Abstract
Ternary content addressable memory (TCAM), widely used in network routers and high-associativity caches, is gaining popularity in machine learning and data-analytic applications. Ferroelectric FETs (FeFETs) are a promising candidate for implementing TCAM owing to their high ON/OFF ratio, non-volatility, and CMOS compatibility. However, conventional single-gate FeFETs (SG-FeFETs) suffer from relatively high write voltage, low endurance, potential read disturbance, and face scaling challenges. Recently, a double-gate FeFET (DG-FeFET) has been proposed and outperforms SG-FeFETs in many aspects. This paper investigates TCAM design challenges specific to DG-FeFETs and introduces a novel 1.5T1Fe TCAM design based on DG-FeFETs. A 2-step search with early termination is employed to reduce the cell area and improve energy efficiency. A shared driver design is proposed to reduce the peripherals area. Detailed analysis and SPICE simulation show that the 1.5T1Fe DGTCAM leads to superior search speed and energy efficiency. The 1.5T1Fe TCAM design can also be built with SG-FeFETs, which achieve search latency and energy improvement compared with 2FeFET TCAM.Keywords
All Related Versions
This publication has 22 references indexed in Scilit:
- Ferroelectric HfO2 Memory Transistors With High-κ Interfacial Layer and Write Endurance Exceeding 1010 CyclesIEEE Electron Device Letters, 2021
- Compact Single-Phase-Search Multistate Content-Addressable Memory Design Using One FeFET/CellIEEE Transactions on Electron Devices, 2020
- Seed-and-vote based in-memory accelerator for DNA read mapping2020
- SearcHD: A Memory-Centric Hyperdimensional Computing With Stochastic TrainingIEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 2020
- Ferroelectric ternary content-addressable memory for one-shot learningNature Electronics, 2019
- An Ultra-Dense 2FeFET TCAM Design Based on a Multi-Domain FeFET ModelIEEE Transactions on Circuits and Systems II: Express Briefs, 2018
- A 28nm HKMG super low power embedded NVM technology based on ferroelectric FETs2016
- 7.4 A 256b-wordlength ReRAM-based TCAM with 1ns search-time and 14× improvement in wordlength-energyefficiency-density product using 2.5T1R cell2016
- Emerging Trends in Design and Applications of Memory-Based Computing and Content-Addressable MemoriesProceedings of the IEEE, 2015
- 17.5 A 3T1R nonvolatile TCAM using MLC ReRAM with Sub-1ns search time2015