Numerical analysis on a catalytic pyrolysis reactor design for plastic waste upcycling using CFD modelling
Open Access
- 22 April 2022
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 12 (20) , 12436-12445
Abstract
Catalytic pyrolysis technologies are a current trend to address plastic waste upcycling, offering lower energy consumption and higher value products when compared to conventional thermal pyrolysis. In this study, catalytic pyrolysis of HDPE was simulated using computational fluid dynamics (CFD) in order to analyze the physical behaviour of a designed fluidized bed reactor unit on a pilot scale. Dimensionless numbers were used for heat and mass transfer assessment to provide useful insights for the scale-up of this technology. A fluidized bed reactor configuration was selected for its effective heat/mass transfer and compatibility with ZSM-5 catalyst. Calculations were performed on a set of temperatures (300–500 °C) and feed rates (0.5–1 kg m−2 s−1) to determine the best performing conditions. Tradeoffs between conversion, production rate and heat consumption were discussed. The key results of this study indicate that a feed rate of 1 kg m−2 s−1 at 500 °C yields the best gasoline production while consuming the lowest amount of energy per kilogram of product.Keywords
This publication has 30 references indexed in Scilit:
- Polyethylene Cracking on a Spent FCC Catalyst in a Conical Spouted BedIndustrial & Engineering Chemistry Research, 2012
- Developing Advanced Catalysts for the Conversion of Polyolefinic Waste Plastics into Fuels and ChemicalsACS Catalysis, 2012
- Catalytic stepwise pyrolysis of packaging plastic wasteJournal of Analytical and Applied Pyrolysis, 2012
- Influence of time and temperature on pyrolysis of plastic wastes in a semi-batch reactorChemical Engineering Journal, 2011
- Single-phase fluid flow distribution and heat transfer in microstructured reactorsChemical Engineering Science, 2011
- Experimental and Numerical Study of Hydrodynamics with Heat Transfer in a Gas−Solid Fluidized-Bed Reactor at Different Particle SizesIndustrial & Engineering Chemistry Research, 2009
- A computational fluid dynamics study of propane/air microflame stability in a heat recirculation reactorCombustion and Flame, 2008
- Pyrolysis of high-density polyethylene in a fluidised bed reactor. Influence of the temperature and residence timeJournal of Analytical and Applied Pyrolysis, 2002
- Zeolite 4A: heat capacity and thermodynamic propertiesSolid State Sciences, 2000
- Measurements and theoretical modelling of the effective thermal conductivity of zeolitesInternational Journal of Heat and Mass Transfer, 1999