Numerical Simulation of Wire Rod Cooling in Eutectoid Steel under Forced-Convection
Open Access
Abstract
A coupled thermal-microstructural simulation model was developed to estimate the thermal history in a eutectoid steel wire rod under continuous cooling and forced-convection. The model coupled the phenomena of heat transfer, phase transformation and estimation of the cooling boundary condition. The thermal histories were analyzed at different cooling rates to emulate the forced-convection conditions by air-jet as in the controlled cooling conveyor. The thermal histories were acquired and used to calculate the forced-convection heat transfer coefficients through the solution of the Inverse Heat Conduction Problem, while the phase transformation was approximated with the Johnson–Mehl–Avrami–Kolmogorov (JMAK) kinetic model. From the heat transfer coefficients and the kinetic parameters, a user-defined function (UDF) was coded and employed in the ANSYS Fluent® software. The model results were compared and validated with the experimental histories, obtaining a good agreement between both responses, while the microstructural evolution of the pearlite was validated using Scanning Electron Microscopy (SEM) and Vickers microhardness. It was found that specimen diameter and air velocity are the main variables to modify the undercooling and therefore the pearlite interlamellar spacing.Keywords
This publication has 26 references indexed in Scilit:
- Influence of Microstructure on Strength and Ductility in Fully Pearlitic SteelsMetals, 2016
- An Approach to Heat Transfer Analysis of Wire Loops Over the Stelmor Conveyor to Predict the Microstructural and Mechanical Attributes of Steel RodsJournal of Thermal Science and Engineering Applications, 2016
- Investigating the effects of short time austenitizing and cooling rate on pearlitic microstructure and mechanical properties of a hot rolled plain eutectoid carbon steelMaterials & Design (1980-2015), 2015
- Development and application of online Stelmor Controlled Cooling SystemApplied Thermal Engineering, 2009
- Application of cold drawn lamellar microstructure for developing ultra-high strength wiresTransactions of Nonferrous Metals Society of China, 2007
- The effect of controlled cooling after hot rolling on the mechanical properties of a commercial high carbon steel wire rodMaterials & Design (1980-2015), 2003
- Microstructural engineering applied to the controlled cooling of steel wire rod: Part III. Mathematical model-formulation and predictionsMetallurgical Transactions A, 1991
- Microstructural engineering applied to the controlled cooling of steel wire rod: Part II. Microstructural evolution and mechanical properties correlationsMetallurgical Transactions A, 1991
- Microstructural engineering applied to the controlled cooling of steel wire rod: Part I. Experimental design and heat transferMetallurgical Transactions A, 1991
- The role of microstructure on the strength and toughness of fully pearlitic steelsMetallurgical Transactions A, 1976