Preparation of modified waterworks sludge particles as adsorbent to enhance coagulation of slightly polluted source water
Authors:
- 4 July 2017
- journal article
- research article
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 24 (23) , 19393-19401
Abstract
Without treatment, waterworks sludge is ineffective as an adsorbent. In this study, raw waterworks sludge was used as the raw material to prepare modified sludge particles through high-temperature calcination and alkali modification. The feasibility of using a combination of modified particles and polyaluminum chloride (PAC) as a coagulant for treatment of slightly polluted source water was also investigated. The composition, structure, and surface properties of the modified particles were characterized, and their capabilities for removing ammonia nitrogen and turbidity were determined. The results indicate that the optimal preparation conditions for the modified sludge particles were achieved by preparing the particles with a roasting temperature of 483.12 °C, a roasting time of 3.32 h, and a lye concentration of 3.75%. Furthermore, enhanced coagulation is strengthened with the addition of modified sludge particles, which is reflected by reduction of the required PAC dose and enhancement of the removal efficiency of ammonia nitrogen and turbidity by over 80 and 93%, respectively. Additional factors such as pH, temperature, dose, and dosing sequence were also evaluated. The optimum doses of modified particles and PAC were 40 and 15 mg/L, respectively, and adding modified particles at the same time as or prior to adding PAC improves removal efficiency.Keywords
Funding Information
- The National Natural Science Foundation of China (51308185)
- the Central University business expenses (2013B32314)
- the National major water projects (2014ZX07405002)
This publication has 35 references indexed in Scilit:
- The Research on Preparation Methods of Sludge-Based Adsorbent and its Application in Water TreatmentAdvanced Materials Research, 2013
- Synthesis of zeolites from the low-grade Tunisian natural illite by two different methodsApplied Clay Science, 2011
- Response surface optimization of acid red 119 dye from simulated wastewater using Al based waterworks sludge and polyaluminium chloride as coagulantJournal of Environmental Management, 2011
- Modification on natural clinoptilolite zeolite for its NH4+ retention capacityJournal of Hazardous Materials, 2009
- Phosphorus Sorbing Materials: Sorption Dynamics and Physicochemical CharacteristicsJournal of Environmental Quality, 2008
- Constructive Approaches Toward Water Treatment Works Sludge Management: An International Review of Beneficial ReusesCritical Reviews in Environmental Science and Technology, 2007
- Characteristics and mechanisms of phosphate adsorption on dewatered alum sludgeSeparation and Purification Technology, 2006
- Removal capacity of water plant alum sludge for phosphorus in aqueous solutionsChemical Speciation & Bioavailability, 2002
- The use of nitrogen adsorption for the characterisation of porous materialsColloids and Surfaces A: Physicochemical and Engineering Aspects, 2001
- Coagulation Process for Removal of Humic Substances from Drinking Water1988