Mechanical performance and modelling of a fully recycled modified CF/PP composite
Authors:
- 2 November 2011
- journal article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 46 (12) , 1503-1517
Abstract
A fully recycled carbon fiber reinforced maleic anhydride grafted polypropylene (MAPP)-modified polypropylene (rCF/rPP) composite material has been developed and characterized. This new composite was manufactured employing papermaking principles, dispersing the recycled carbon fibers (rCF) in water, and forming them into mats. Two layers of the recycled polypropylene (rPP) films manufactured using press-forming were sandwiched between three rCF preform layers in a stack. The stack was heated and press-formed resulting in a composite plate with a nominal thickness of 1.20 mm and a fiber volume fraction of 40%. A series of tensile tests using rectangular specimens cut in four different directions (0°, 90°, ± 45°) in the composite plate were performed to confirm in-plane material isotropy. Models to predict stiffness and strength of the short fiber rCF/rPP composite were also employed and validated using experiments. The models were found to be in good agreement with experimental results. Fiber length distribution measurements were performed before (unprocessed) and after (processed) composite manufacturing to investigate the influence of processing on fiber degradation. The results revealed a significant reduction in fiber length by the press-forming operation. To model the viscoelastic and viscoplastic responses of the composite an inelastic material model was employed and characterized using a series of creep and recovery tests. From the creep tests, it was found that the time and stress dependence of viscoplastic strains follows a power law. The viscoelastic response of the composite was found to be linear in the investigated stress range. The material model was validated in constant stress rate tensile tests and the agreement was good, even close to the rupture stress.Keywords
This publication has 20 references indexed in Scilit:
- Time-dependent Nonlinear Behavior of Recycled Polypropylene in High Tensile Stress LoadingJournal of Thermoplastic Composite Materials, 2011
- Recycling carbon fibre reinforced polymers for structural applications: Technology review and market outlookWaste Management, 2011
- CFRP-Recycling Following a Pyrolysis Route: Process Optimization and PotentialsJournal of Composite Materials, 2009
- Nonlinear viscoelastic viscoplastic material model including stiffness degradation for hemp/lignin compositesComposites Science and Technology, 2008
- Stiffness and strength of flax fiber/polymer matrix compositesPolymer Composites, 2006
- Stiffness predictions for unidirectional short-fiber composites: Review and evaluationComposites Science and Technology, 1999
- Influence of fibre length and concentration on the properties of glass fibre-reinforced polypropylene: Part 3. Strength and strain at failureComposites Part A: Applied Science and Manufacturing, 1996
- Creep and recovery behaviour of ultra-high molecular weight polyethylene in the region of small uniaxial deformationsPolymer, 1984
- Viscoelastic Characterization of a Nonlinear Fiber-Reinforced PlasticJournal of Composite Materials, 1971
- Tensile properties of fibre-reinforced metals: Copper/tungsten and copper/molybdenumJournal of the Mechanics and Physics of Solids, 1965