Critical Distance Default Values for Structural Steels and a Simple Formulation to Estimate the Apparent Fracture Toughness in U-Notched Conditions
Open Access
Abstract
The structural integrity assessment of components containing notch-type defects has been the subject of extensive research in the last few decades. The assumption that notches behave as cracks is generally too conservative, making it necessary to develop assessment methodologies that consider the specific nature of notches, providing accurate safe predictions of failure loads or defect sizes. Among the different theories or models that have been developed to address this issue the Theory of Critical Distances (TCD) is one of the most widely applied and extended. This theory is actually a group of methodologies that have in common the use of the material toughness and a length parameter that depends on the material (the critical distance; L). This length parameter requires calibration in those situations where there is a certain non-linear behavior on the micro or the macro scale. This calibration process constitutes the main practical barrier for an extensive use of the TCD in structural steels. The main purpose of this paper is to provide, through a set of proposed default values, a simple methodology to accurately estimate both the critical distance of structural steels and the corresponding apparent fracture toughness predictions derived from the TCD.Keywords
Funding Information
- Ministerio de Asuntos Económicos y Transformación Digital, Gobierno de España (MAT2014-58443-P)
This publication has 28 references indexed in Scilit:
- Analysis of notch effect in PMMA using the Theory of Critical DistancesEngineering Fracture Mechanics, 2012
- Assessment of notched structural components using Failure Assessment Diagrams and the Theory of Critical DistancesEngineering Fracture Mechanics, 2011
- An Elasto-Plastic Reformulation of the Theory of Critical Distances to Estimate Lifetime of Notched Components Failing in the Low/Medium-Cycle Fatigue RegimeJournal of Engineering Materials and Technology, 2010
- On the Vickers Indentation Fracture Toughness TestJournal of the American Ceramic Society, 2007
- The fracture mechanics of finite crack extensionEngineering Fracture Mechanics, 2005
- A mechanistic approach to critical‐distance methods in notch fatigueFatigue & Fracture of Engineering Materials & Structures, 2001
- Cracking in PMMA containing U‐shaped notchesFatigue & Fracture of Engineering Materials & Structures, 2000
- Stress field near a large blunted tip V-notch and application of the concept of the critical notch stress intensity factor (NSIF) to the fracture toughness of very brittle materialsEngineering Fracture Mechanics, 1994
- On the relationship between critical tensile stress and fracture toughness in mild steelJournal of the Mechanics and Physics of Solids, 1973
- Yielding of steel sheets containing slitsJournal of the Mechanics and Physics of Solids, 1960