The extended N2 method taking into account higher mode effects in elevation
Authors:
- 25 February 2011
- journal article
- research article
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 40 (14) , 1571-1589
Abstract
The N2 method has been extended in order to take into account higher mode effects in elevation. The extension is based on the assumption that the structure remains in the elastic range when vibrating in higher modes. The seismic demand in terms of displacements and storey drifts can be obtained by enveloping the results of basic pushover analysis and the results of standard elastic modal analysis. The approach is consistent with the extended N2 method used for plan‐asymmetric buildings. The proposed procedure was applied to three variants of three steel frame buildings used in the SAC project. The structural response was investigated for two sets of ground motions. Different ground motion intensities were used in order to investigate the influence of the magnitude of plastic deformations. The N2 results were compared with the results of nonlinear response‐history analysis, two other pushover‐based methods (modal pushover analysis (MPA) and modified MPA (MMPA)), and pushover analysis without consideration of higher modes. It was found that a considerable influence of higher modes on storey drifts is present at the upper part of medium‐and high‐rise structures. This effect is the largest in the case of elastic behaviour and decreases with ground motion intensity. The higher mode effects also depend on the spectral shape. The approximate methods (extended N2, MPA and MMPA) are able to provide fair estimates of response in the case of the test examples. Accuracy decreases with the height of the building, and with the intensity of ground motion. The N2 results are generally conservative. Copyright © 2011 John Wiley & Sons, Ltd.Keywords
This publication has 21 references indexed in Scilit:
- Generalized force vectors for multi‐mode pushover analysisEarthquake Engineering & Structural Dynamics, 2010
- Application of MPA to estimate probability of collapse of structuresEarthquake Engineering & Structural Dynamics, 2010
- A story shear-based adaptive pushover procedure for estimating seismic demands of buildingsEngineering Structures, 2010
- Seismic evaluation of an existing complex RC buildingBulletin of Earthquake Engineering, 2009
- A consecutive modal pushover procedure for estimating the seismic demands of tall buildingsEngineering Structures, 2009
- An alternative pushover analysis procedure to estimate seismic displacement demandsEngineering Structures, 2008
- TORSIONAL EFFECTS IN THE PUSHOVER-BASED SEISMIC ANALYSIS OF BUILDINGSJournal of Earthquake Engineering, 2005
- DEVELOPMENT AND VERIFICATION OF A DISPLACEMENT-BASED ADAPTIVE PUSHOVER PROCEDUREJournal of Earthquake Engineering, 2004
- An upper-bound pushover analysis procedure for estimating the seismic demands of high-rise buildingsEngineering Structures, 2004
- A modal pushover analysis procedure for estimating seismic demands for buildingsEarthquake Engineering & Structural Dynamics, 2001