Effects of sample thickness on the van der Pauw technique for resistivity measurements
Authors:
- 22 February 2005
- journal article
- conference paper
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 76 (3) , 033907
Abstract
The van der Pauw technique is commonly used for electrical transport measurements on solid materials and is suited to thin, arbitrarily shaped samples, with the contacts placed anywhere on the periphery. Previous investigations have determined the effects of sample shape, contact size, and contact placement on the accuracy of this technique. Sample inhomogeneity effects have also been investigated. The effects of the sample thickness appear not to have been previously studied and are investigated here in order to establish precisely what is meant by a thin sample. The deterioration in the accuracy of the technique is followed as the sample thickness is increased. The results indicate that the van der Pauw technique may be used for samples where the thickness is comparable to the surface dimensions. The investigation also shows that the technique is valid for arbitrarily thick samples provided that low resistance electrodes are placed across the entire edge, perpendicular to the surface, in order to maintain an effective two-dimensional current distribution. This finding is useful for transport measurements on materials that have been prepared, for example, by solid state reaction using sintering methods.Keywords
This publication has 9 references indexed in Scilit:
- Thermoelectric, transport, and magnetic properties of the polaron semiconductorPhysical Review B, 2000
- Direct measurement of the resistivity weighting functionReview of Scientific Instruments, 1998
- Resistive and Hall weighting functions in three dimensionsReview of Scientific Instruments, 1998
- Effects of macroscopic inhomogeneities on resistive and Hall measurements on crosses, cloverleafs, and barsReview of Scientific Instruments, 1996
- Low-temperature electrical conductivity of Ta-compensated sodium bronze near the metal-insulator transitionPhysical Review B, 1991
- Hall effect near the metal-insulator transitionPhysical Review B, 1990
- Measurement of contact placement errors in the van der Pauw techniqueReview of Scientific Instruments, 1989
- Effect of contact size and placement, and of resistive inhomogeneities on van der Pauw measurementsReview of Scientific Instruments, 1989
- Measurement of High Resistivity Semiconductors Using the van der Pauw MethodReview of Scientific Instruments, 1973