Structure development in melt spinning of poly(ethylene‐co‐octene) filaments with various comonomer contents
Authors:
- 12 April 2004
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 93 (1) , 9-22
Abstract
An experimental study of the spinnability and the variation in crystallinity and orientation of melt spinning of poly(ethylene‐co‐octene) with different contents of comonomers was carried out. The spinning behavior of these polymers was investigated under different draw‐down ratios and temperatures and correlated to spinline stress. The melt‐spun filaments were characterized by wide‐angle X‐ray diffraction birefringence, and differential scanning calorimetry. S‐1 is a high‐density polyethylene and S‐2, S‐3, and S‐4 have 16, 22, and 38 wt % octene. An orthorhombic unit cell was found in all four polymers, but a dominant hexagonal structure (perhaps mesophase) was found for the highest octene level (S‐4). The orientation factors for the a‐, b‐, and c‐axis of the orthorhombic crystal structure and a‐axis of the hexagonal phase were then calculated. The crystalline orientation behavior of the lower octene copolymers (S‐1, S‐2, and S‐3) are similar and can be represented as a “row‐nucleated“ structure. However, the orientation behavior of S‐4 was different. The uniaxial mechanical properties were also measured. The Young's modulus and tensile strength generally increased with birefringence for all polymers. With increasing content of octene, the Young's modulus showed a decrease from semicrystalline thermoplastic toward an elastomer. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 9–22, 2004Keywords
This publication has 54 references indexed in Scilit:
- Structure Development in Melt Spinning Syndiotactic Polypropylene and Comparison to Isotactic PolypropyleneInternational Polymer Processing, 2000
- Glass transition, crystallinity, resin stiffness, and branch distribution in metallocene and Ziegler-Natta ethylene 1-olefinsJournal of Macromolecular Science, Part B, 1999
- Comparative Study of Structure Development in Melt Spinning Polyolefin FibersInternational Polymer Processing, 1998
- Longitudinal growth of polymer crystals from flowing solutions. VI. Melting behavior of continuous fibrillar polyethylene crystalsJournal of Polymer Science: Polymer Physics Edition, 1979
- Extensional flow‐induced crystallization in polyethylene melt spinningJournal of Polymer Science: Polymer Physics Edition, 1977
- Orientation of polymer molecules during melt spinning. II. Orientation of crystals in as‐spun polyolefin fibersJournal of Polymer Science: Polymer Physics Edition, 1973
- Direct evidence for distinctive, stress-induced nucleus crystals in the crystallization of oriented polymer meltsJournal of Macromolecular Science, Part B, 1969
- Oriented crystallization in polymersJournal of Macromolecular Science, Part B, 1967
- Studies on the orientation phenomena by fiber formation from polymer melts. IV. Effect of molecular structure on orientation. Polyethylene and polystyreneJournal of Applied Polymer Science, 1962
- Quantitative evaluation of orientation in cellulose fibres from the X‐ray fibre diagramRecueil des Travaux Chimiques des Pays-Bas, 1946