Intensified bioleaching of a spent Co–Mo catalyst through the addition of extracellular polymeric substances (EPSs) and its mechanism exploration
Authors:
- 19 June 2024
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 53 (28) , 11787-11799
Abstract
The extraction and recovery of valuable metals from various spent catalysts via bioleaching represents a green, low-carbon and eco-friendly process. However, the pulp density of spent catalysts is usually 1.0% or lower owing to their toxicity, denoting low process capacity and poor practical potential. In this study, an intensified bioleaching strategy was used for the first time to promote the release efficiencies of both Co and Mo from a spent Co–Mo catalyst at a high pulp density of 10% by supplementing extracellular polymeric substances (EPSs). The results showed that the addition of 0.6 g L−1 EPSs harvested a maximum release of 73.6% for Co and 72.5% for Mo after 9 days of contact, with an evident elevation of 22.6% for Co and 24.4% for Mo, in contrast to no addition, respectively. The added EPS not only promoted the growth of plankton cells to produce more active molecules but also boosted the adhesion of leaching cells to the spent catalyst to form stable aggregates. Moreover, the resulting aggregates allowed for the gathering and confinement of the active small molecules, including Fe3+ and Fe2+, inside the micro-areas between the spent catalysts and the cells for quick electronic transfer as an interface oxidation/reduction reaction to free both Co and Mo from the spent catalyst.Keywords
Funding Information
- National Key Research and Development Program of China (2018YFC190061)
- National Natural Science Foundation of China (52200141)
- Natural Science Foundation of Beijing Municipality (8172042)
This publication has 38 references indexed in Scilit:
- Leaching Behaviors of Yulong Refractory Oxide Copper Ores from Tibet in Sulfuric Acid SolutionsJournal of Sustainable Metallurgy, 2023
- Three-dimensional blocky sponge based CoMoO4 catalyst activates peroxymonosulfate to degrade sulfadimethoxine: A remedy for ready-made catalysts to achieve convenient and continuous operationChemical Engineering Journal, 2022
- Bioleaching of platinum, palladium, and rhodium from spent automotive catalyst using bacterial cyanogenesisBioresource Technology Reports, 2022
- Generation behavior of extracellular polymeric substances and its correlation with extraction efficiency of valuable metals and change of process parameters during bioleaching of spent petroleum catalystChemosphere, 2021
- A bio-hydrometallurgical approach towards leaching of lanthanum from the spent fluid catalytic cracking catalyst using Aspergillus nigerHydrometallurgy, 2019
- Molybdenum in natural waters: A review of occurrence, distributions and controlsApplied Geochemistry, 2017
- Sequential biological process for molybdenum extraction from hydrodesulphurization spent catalystChemosphere, 2016
- The role of bacterial extracellular polymeric substances in geomicrobiologyChemical Geology, 2014
- Component analysis of extracellular polymeric substances (EPS) during aerobic sludge granulation using FTIR and 3D-EEM technologiesBioresource Technology, 2012
- Bioleaching review part A:Applied Microbiology and Biotechnology, 2003