Effect and mechanism of modification treatment on ammonium and phosphate removal by ferric-modified zeolite
- 15 February 2018
- journal article
- research article
- Published by Taylor & Francis in Environmental Technology
- Vol. 40 (15) , 1959-1968
Abstract
In this study, the reason for the decline of ammonium sorption capacity by zeolite after ferric modification and the effect of modification treatment on ammonium and phosphate removal by ferric-modified zeolite were studied. Modification treatment media (Na salt and HCl) and Na concentration (0.1 and 0.9 mol/L) have been investigated. Zeolites have been characterized by SEM, XRD, BET and XRF; meanwhile, CEC and pHpzc have been also determined. Equilibrium batch sorption for ammonium and phosphate individually and kinetics batch sorption for ammonium were conducted. The results showed a decline in sorption capacity or diffusion coefficients for ammonium but an increase for phosphate after ferric modification. The decrease of surface negative charge was the main contributor for the former, but iron loading did not well account for the latter. The performance of 0.1 mol/L Na modification treatment was better than other treatments for ammonium sorption and equal to HCl modification treatment for phosphate sorption, and the enhancement extent increased for ammonium but declined for phosphate when Na concentration increased. The advantage of Na modification treatment for ammonium was due to the enhancement of textural properties and high exchange rate with ammonium.Keywords
Funding Information
- National Undergraduate Innovation Experiment Project (201510491043)
- China University of Geosciences Open teaching laboratory Project (SKJ2016001)
This publication has 30 references indexed in Scilit:
- Adsorption mechanisms of high-levels of ammonium onto natural and NaCl-modified zeolitesSeparation and Purification Technology, 2013
- Adsorption capacity of iron- or iron–manganese-modified zeolite-rich tuffs for As(III) and As(V) water pollutantsApplied Clay Science, 2011
- Extra-framework cation release from heulandite-type rich tuffs on exchange with NH4+Journal of Environmental Management, 2011
- Removal of ammonium from aqueous solutions using zeolite synthesized from fly ash by a fusion methodDesalination, 2011
- Characterization and properties of iron oxide-coated zeolite as adsorbent for removal of copper(II) from solution in fixed bed columnChemical Engineering Journal, 2009
- Adsorption kinetic of arsenates as water pollutant on iron, manganese and iron–manganese-modified clinoptilolite-rich tuffsJournal of Hazardous Materials, 2009
- Removal of Mn2+ ions from drinking water by using Clinoptilolite and a Clinoptilolite–Fe oxide systemWater Research, 2006
- Characteristics and adsorption properties of iron-coated sandWater Science & Technology, 1997
- Coating of silica sand with goethite: preparation and analytical identificationGeoderma, 1993
- A SIMPLE METHOD OF DETERMINING PORE AND SURFACE DIFFUSIVITIES IN ADSORPTION STUDIESChemical Engineering Communications, 1991