Moldflow Simulation and Characterization of Pure Copper Fabricated via Metal Injection Molding
Open Access
Abstract
Metal injection molding (MIM) is a representative near-net-shape manufacturing process that fabricates advanced geometrical components for automobile and device industries. As the mechanical performance of an MIM product is affected by green-part characteristics, this work investigated the green part of pure copper processed with MIM using the injection temperature of ~180 °C and injection pressure of ~5 MPa. A computational analysis based on the Moldflow program was proposed to simulate the effectivity of the process by evaluating the confidence of fill, quality prediction, and pressure drop of three distinctive regions in the green part. The results showed that the ring and edge regions of the green parts showed localized behavior, which was related to processing parameters including the position of the gate. A microstructural observation using scanning electron microscopy and a 3D X-ray revealed that both the surface and body matrix consisted of pores with some agglomeration of micro-pores on the edges and ring part, while any critical defects, such as a crack, were not found. A microhardness analysis showed that the three regions exhibited a reasonable uniformity with a slight difference in one specific part mainly due to the localized pore agglomeration. The simulation results showed a good agreement with the microstructures and microhardness data. Thus, the present results are useful for providing guidelines for the sound condition of MIM-treated pure copper with a complex shape.Keywords
Funding Information
- Korea Institute for Advancement of Technology (#P0023676)
This publication has 51 references indexed in Scilit:
- The Effect of Injection Parameters on Morphology in Metal Injection MouldingAdvanced Materials Research, 2013
- Progress in Titanium Metal Powder Injection MoldingMaterials, 2013
- Rheological Behavior of Carbon Nanotubes / Copper Feedstocks for Metal Injection MoldingAdvanced Materials Research, 2011
- Effect of powders and binders on material properties and molding parameters in iron and stainless steel powder injection molding processPowder Technology, 2009
- Fabrication of metal matrix composites by metal injection molding—A reviewJournal of Materials Processing Technology, 2008
- Experimental and numerical analysis of metal injection molded productsJournal of Materials Processing Technology, 2005
- Two-phase flow in high-heat-flux micro-channel heat sink for refrigeration cooling applications: Part I––pressure drop characteristicsInternational Journal of Heat and Mass Transfer, 2005
- Determination of the optimal process parameters in metal injection molding from experiments and numerical modelingJournal of Materials Processing Technology, 2003
- Thermal–hydraulic performance of small scale micro-channel and porous-media heat-exchangersInternational Journal of Heat and Mass Transfer, 2001
- Pressure losses in the packing stage of injection moldingPolymer Engineering & Science, 1986