High Power Density Ag2Se/Sb1.5Bi0.5Te3‐Based Fully Printed Origami Thermoelectric Module for Low‐Grade Thermal Energy Harvesting
Authors:
Open Access
- 16 June 2024
- journal article
- research article
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (40)
Abstract
Printing technologies have the potential to reduce the manufacturing costs of many electronic devices significantly. Here, a scalable manufacturing route for high‐performance fully printed thermoelectric generators (TEGs) as a cost‐effective solution for energy harvesting is demonstrated. This work presents a facile one‐pot synthesis method to develop a high‐performance Ag2Se‐based n‐type paste, which is used to fabricate a fully printed origami TEG by employing the Ag2Se‐based material for the n‐type legs and a previously reported Bi‐Sb‐Te‐based paste for the p‐type legs. The n‐type film exhibits a power factor of 13.5 µW cm−1 K−2 and a maximum figure‐of‐merit (ZT) of ≈ 0.92. Furthermore, printable carbon paste is introduced as an effective interface between the thermoelectric and electrode materials, which reduces the contact resistances in the thermoelectric device. The origami folded TEG exhibits an open‐circuit voltage (VOC) of 284 mV, a power output of 370.88 µW, and an exceptionally high power density (pmax) of 10.72 Wm−2 at a temperature difference (∆T) of 80.7 K, considering that the TEG fabrication does not involve any pressure treatment and vacuum sintering. These results underscore the scalability of the presented manufacturing process and the capability of printed origami TEGs for powering the Internet of Things (IoT) with low‐grade waste heat.Keywords
Funding Information
- Bundesministerium für Forschung, Technologie und Raumfahrt
- Deutsche Forschungsgemeinschaft (EXC‐2082/1 – 390761711)
- Deutsche Bundesstiftung Umwelt
- H2020 European Research Council (grant 101097876 ‐ ORTHOGONAL)
- Horizon 2020 Framework Programme (814945─SolBio‐Rev)
- Ministerium für Wissenschaft, Forschung und Kunst Baden-Württemberg
This publication has 36 references indexed in Scilit:
- Facile Fabrication of Flexible and High‐Performing Thermoelectrics by Direct Laser Printing on Plastic FoilAdvanced Materials, 2023
- Inorganic‐Based Printed Thermoelectric Materials and DevicesAdvanced Engineering Materials, 2022
- High Figure‐of‐Merit Telluride‐Based Flexible Thermoelectric Films through Interfacial Modification via Millisecond Photonic‐Curing for Fully Printed Thermoelectric GeneratorsAdvanced Science, 2022
- Assembly‐Free Fabrication of High‐Performance Flexible Inorganic Thin‐Film Thermoelectric Device Prepared by a Thermal DiffusionAdvanced Energy Materials, 2022
- Printed ThermoelectricsAdvanced Materials, 2022
- A Universal Approach for Room‐Temperature Printing and Coating of 2D MaterialsAdvanced Materials, 2021
- Flexible Thermoelectric Devices of Ultrahigh Power Factor by Scalable Printing and Interface EngineeringAdvanced Functional Materials, 2019
- 3D Conformal Printing and Photonic Sintering of High‐Performance Flexible Thermoelectric Films Using 2D NanoplatesAdvanced Functional Materials, 2019
- Large‐scale integration of flexible materials into rolled and corrugated thermoelectric modulesJournal of Applied Polymer Science, 2016
- Facile Synthesis of Poly(3,4‐ethylenedioxythiophene) Nanofibers from an Aqueous Surfactant SolutionSmall, 2006