Micromechanical modeling on the rate-dependent viscoplastic behavior of polymer composites with thermal residual stress effect
Authors:
- 3 July 2014
- journal article
- research article
- Published by SAGE Publications in Journal of Reinforced Plastics and Composites
- Vol. 33 (17) , 1574-1589
Abstract
The research focuses on the effect of thermal residual stress on the rate-sensitive viscoplastic behavior of polymer matrix composites with various fiber cross-sectional shapes. Micromechanical analysis was then conducted to incorporate the inelastic deformation and thermal residual stress into the micromechanical properties of a repeating cell and obtained the macromechanical response of polymer matrix composites by using homogenization theory. The responses of AS4/Polyetheretherketone (PEEK) with circular, square, and elliptical fibers are predicted by the method above at 10−5, 10−1, and 100/s with respect to 15°, 30°, 45°, 60°, 75°, and 90° off-axis angles. The results show that the viscoplastic difference of the response for various fiber shapes becomes more evident with the increase of strain rate. The effect of thermal residual stress varying with off-axis angle is similar to the sinusoidal curve. Besides, the thermal residual stress provides the largest effect on the response with square fiber and the smallest effect on the response with elliptical fiber, which of the effect decreases with the strain rate increasing.Keywords
This publication has 38 references indexed in Scilit:
- Effects of residual thermal stresses on the debond characterization of sandwich beamsJournal of Reinforced Plastics and Composites, 2011
- Strain-Rate Sensitivity of a Pultruded E-Glass/Polyester CompositeJournal of Composites for Construction, 2009
- Numerical Implementation of Polymer Viscoplastic Equations for High Strain-Rate Composite ModelsJournal of Aerospace Engineering, 2009
- Residual stresses in thermoplastic composites – a study of the literature. Part III: Effects of thermal residual stressesComposites Part A: Applied Science and Manufacturing, 2007
- Effect of Fiber Arrangement on Residual Thermal Stress Distributions in a Unidirectional CompositeJournal of Composite Materials, 2007
- Residual stresses in thermoplastic composites—A study of the literature—Part I: Formation of residual stressesComposites Part A: Applied Science and Manufacturing, 2006
- Thermo-visco-plastic behaviour of fibre-reinforced polymer compositesComposites Science and Technology, 2006
- Viscoplastic deformation of an epoxy resin at elevated temperaturesJournal of Applied Polymer Science, 2006
- Yielding Behavior of Model Epoxy Matrices for Fiber Reinforced Composites: Effect of Strain Rate and TemperatureJournal of Macromolecular Science, Part B, 2005
- Tension and compression tests of two polymers under quasi-static and dynamic loadingPolymer Testing, 2002