Event-driven strain cycle monitoring of railway bridges using a wireless sensor network with sentinel nodes
Authors:
- 16 September 2016
- journal article
- research article
- Published by Hindawi Limited in Structural Control and Health Monitoring
- Vol. 24 (7) , e1934
Abstract
Due to the increasing traffic volume on the European railway network, the remaining fatigue life of existing steel bridges is a major concern. Several investigations demonstrated that supplementing the assessment with monitoring data enables to achieve more reliable remaining fatigue life estimations. In this paper, an event-driven monitoring system based on a wireless sensor network that consists of two functionally different components was designed and tested. Sentinel nodes, which were mounted on the track, were used for detecting approaching trains and alerting with alarm messages the monitoring nodes. These nodes, which were mounted on the bridge, started strain sensing and data recording after receiving the alarm message and went back to a power saving mode upon completion. An embedded data processing algorithm transformed the recorded raw data into a much smaller data set representing strain cycles. A test deployment on a railway bridge demonstrated that train detection and alarming was fast and reliable. The combination of event-driven monitoring and embedded data processing allowed to extend the battery lifetime of monitoring nodes to several months.Keywords
Funding Information
- SwissElectric Research
- Polish Swiss Research Programme
This publication has 20 references indexed in Scilit:
- Fatigue reliability assessment of a historic railway bridge designed by Gustave EiffelStructure and Infrastructure Engineering, 2014
- A low-noise, real-time, wireless data acquisition system for structural monitoring applicationsStructural Control and Health Monitoring, 2013
- Fatigue Assessment and Service Life Prediction of Existing Steel Bridges by Integrating SHM into a Probabilistic Bilinear S-N ApproachJournal of Structural Engineering, 2013
- Statistical analysis of stress spectra for fatigue life assessment of steel bridges with structural health monitoring dataEngineering Structures, 2012
- Rapid-to-deploy reconfigurable wireless structural monitoring systems using extended-range wireless sensorsSmart Structures and Systems, 2010
- Wireless sensor networks for long-term structural health monitoringSmart Structures and Systems, 2010
- Monitoring and enhanced fatigue evaluation of a steel railway bridgeEngineering Structures, 2010
- Design of a Robust, High-rate Wireless Sensor Network for Static and Dynamic Structural MonitoringJournal of Intelligent Material Systems and Structures, 2008
- Design and Implementation of Scalable Wireless Sensor Network for Structural MonitoringJournal of Infrastructure Systems, 2008
- A Summary Review of Wireless Sensors and Sensor Networks for Structural Health MonitoringThe Shock and Vibration Digest, 2006