Influence of the wheel-rail contact instationary process on contact parameters
- 1 July 2007
- journal article
- Published by SAGE Publications in The Journal of Strain Analysis for Engineering Design
- Vol. 42 (5) , 377-387
Abstract
The rapid convergence of the tangential rolling contact parameters to their stationary values, combined with the high computational cost associated with calculations using instationary models, has meant that stationary models are usually employed in railway dynamics. However, the validity of stationary models when the applied contact conditions are subjected to rapid changes has not been sufficiently investigated. With the objective of deducing the effects of the evolution of the instationary process on the contact parameters, the tangential contact problem is solved for a set of reference conditions. For this purpose a calculation model is adapted, from which it is possible to analyse the evolution of the contact parameters when the forces exerted between rail and wheel are subjected to rapid changes. From the calculations made, situations impossible to simulate by means of stationary theories are obtained according to the frequency of variation in the forces, such as slip zones in the leading edge of the contact area and reverse contact (locally, the traction field is opposite to the direction of the external force transmitted to the contact).Keywords
This publication has 14 references indexed in Scilit:
- A new method for the solution of the normal contact problem in the dynamic simulation of railway vehiclesVehicle System Dynamics, 2005
- Analytic approach to obtain shear traction in a cylindrical contact with reverse slipThe Journal of Strain Analysis for Engineering Design, 2004
- Solving 2D transient rolling contact problems using the BEM and mathematical programming techniquesInternational Journal for Numerical Methods in Engineering, 2001
- Effect of changes in contact geometry on shakedown of surfaces in rolling/sliding contactInternational Journal of Mechanical Sciences, 1992
- The influence of inertia forces on steady-state rolling contactActa Mechanica, 1989
- Derivation of Frequency Dependent Creep Coefficients Based on an Elastic Half-Space ModelVehicle System Dynamics, 1986
- Contact Mechanics1985
- High-Frequency Contact Mechanics: The Derivation of Frequency-Dependent Creep CoefficientProceedings of the Institution of Mechanical Engineers, Part C: Mechanical Engineering Science, 1984
- Contact Pressures on Closely Conforming Elastic BodiesJournal of Applied Mechanics, 1981
- Survey of Wheel—Rail Rolling Contact TheoryVehicle System Dynamics, 1979