Winding Factors and Magnetic Fields in Permanent-Magnet Brushless Machines With Concentrated Windings and Modular Stator Cores
Authors:
- Greg HeinsGHGreg Heins
- Dan M. IonelDan M. Ionel
- Mark ThieleMTMark Thiele
- 21 January 2015
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 51 (4) , 2924-2932
Abstract
Removing some sections of the stator yoke in a permanent-magnet brushless machine can be beneficial for reducing punching waste and simplifying motor manufacture. However, in some cases, restricting the possible flux paths, in this way, will have a detrimental impact on the torque and air-gap harmonics. This paper discusses the potential implications of modular stator core arrangements and presents the air-gap flux density harmonics and winding factors for potential slot/pole combinations. Finite-element analysis (FEA) simulations are presented to support the analytical calculations. The analysis indicates that the performance reduction from using a modular stator is minimal when the number of slots and poles are similar but drops off substantially when this is not the case. A modular core stator will increase the MMF subharmonics due to the magnet field but can reduce the subharmonics due to the armature if a single-layer winding is used. The effect of slotting is very similar for a modular and conventional core machine, and FEA results match previously published analytical analyses.Keywords
This publication has 19 references indexed in Scilit:
- Influence of Flux Gaps on Electromagnetic Performance of Novel Modular PM MachinesIEEE Transactions on Energy Conversion, 2014
- Comparative Studies of Modular and Unequal Tooth PM Machines Either With or Without Tooth TipsIEEE Transactions on Magnetics, 2014
- Theory and Design of Fractional-Slot Multilayer WindingsIEEE Transactions on Industry Applications, 2013
- A novel 12-teeth/10-poles PM machine with flux barriers in stator yoke2012
- Influence of Additional Air Gaps Between Stator Segments on Cogging Torque of Permanent-Magnet Machines Having Modular StatorsIEEE Transactions on Magnetics, 2011
- Three phase tooth-concentrated multiple-layer fractional windings with low space harmonic content2010
- A study on eddy-current losses in rotors of surface permanent-magnet synchronous machinesIEEE Transactions on Industry Applications, 2006
- Comparison of PM brushless motors, having either all teeth or alternate teeth woundIEEE Transactions on Energy Conversion, 2006
- Winding factors and Joule losses of permanent magnet machines with concentrated windings2003
- A new analytical method for the computation of air-gap reactances in 3-phase induction motors2002