Modification of Back Contact in Cu2ZnSnS4 Solar Cell by Inserting Al-Doped ZnO Intermediate Layer
Authors:
- 17 December 2020
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 12 (52) , 58060-58071
Abstract
The optimization of back contact interface is crucial to improve the performance of Cu2ZnSnS4 (CZTS) thin film solar cells. In this paper, we first employ Al-doped ZnO (AZO) as the intermediate layer into the Mo/CZTS interface to improve the quality of back contact region. This AZO intermediate layer, obtained from the sputtering method prior to the CZTS precursor deposition, initially blocks the direct contact of CZTS with the Mo layer and thus indeed suppresses the decomposition reaction between Mo and CZTS. Consequently, the generation of voids at the back contact region is obviously avoided. Besides, the AZO intermediate layer can inhibit the reaction between sulfur (S) and Mo during sulfurization process, and thus significantly reduce the thickness of MoS2. Meanwhile, the AZO intermediate layer with suitable thickness does not affect the crystal quality of CZTS absorber layer. Moreover, the effects of different thicknesses of predeposited AZO on the film morphology, composition, and corresponding device performance were systematically studied. After optimizing the thickness of the AZO layer, the efficiency of the resultant device has increased from 7.1% to 8.4% (the active area efficiency is 9.2%).Keywords
Funding Information
- East China Normal University
- Ministry of Education of the People's Republic of China
- National Natural Science Foundation of China (61574057, 61874045)
This publication has 36 references indexed in Scilit:
- Effects of Back Contact Instability on Cu2ZnSnS4 Devices and ProcessesChemistry of Materials, 2013
- The effect of Zn excess on kesterite solar cellsSolar Energy Materials and Solar Cells, 2013
- A Detrimental Reaction at the Molybdenum Back Contact in Cu2ZnSn(S,Se)4 Thin-Film Solar CellsJournal of the American Chemical Society, 2012
- Effects of Transition Metal Dichalcogenide Molybdenum Disulfide Layer Formation in Copper–Zinc–Tin–Sulfur Solar Cells from Numerical AnalysisJapanese Journal of Applied Physics, 2012
- Co-evaporated Cu2ZnSnSe4 films and devicesSolar Energy Materials and Solar Cells, 2012
- Calculation of the lattice dynamics and Raman spectra of copper zinc tin chalcogenides and comparison to experimentsJournal of Applied Physics, 2012
- Chemical Insights into the Instability of Cu2ZnSnS4 Films during AnnealingChemistry of Materials, 2011
- Synthesis of Cu2ZnSnS4 Nanocrystal Ink and Its Use for Solar CellsJournal of the American Chemical Society, 2009
- Thin‐film solar cells: device measurements and analysisProgress in Photovoltaics: Research and Applications, 2004
- Thickness determination for SiO2 films on Si by X-ray reflectometry at the Si K edgeThin Solid Films, 2004