Microstructural Evolution of Metal–Insulator–Metal Capacitor Prepared by Atomic-Layer-Deposition System at Elevated Temperature
Authors:
- 1 April 2006
- journal article
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 45 (4S) , 3036
Abstract
The rougher surface and raised-hollow holes were observed in the TiN/Al2O3/HfO2/Al2O3/TiN/SiO2/Si multi-stack metal–insulator–metal (MIM) capacitor sample after 1000 °C, 60 s rapid thermal annealing (RTA) process in N2. The surface became rougher partially resulted from the nucleation of TiN layer after RTA. Experimental results also indicated that the oxygen content in the HfO2 was desorbed and the remaining Hf was crystallized. Also, the TiN and Al2O3 layers were intermixed and partially re-crystallized at this high temperature. Very clear morié fringes could be observed in the high-resolution transmission electron microscopy (HR-TEM) micrographs. Also, the energy dispersive spectroscopy (EDS) results indicated that the nitrogen in TiN was desorbed and the TiN was phase transformed to TiO2. This phenomenon might result from the TiN oxidation process during the high-temperature thermal annealing.Keywords
This publication has 7 references indexed in Scilit:
- Oxidation behavior of titanium nitride filmsJournal of Vacuum Science & Technology A, 2005
- Improvement of Contact Resistance between Ru Electrode and TiN Barrier in Ru/Crystalline-Ta2O5/Ru Capacitor for 50 nm Dynamic Random Access MemoryJapanese Journal of Applied Physics, 2005
- High-performance nonvolatile HfO/sub 2/ nanocrystal memoryIEEE Electron Device Letters, 2005
- Leakage mechanisms and dielectric properties of Al2O3/TiN-based metal-insulator-metal capacitorsApplied Physics Letters, 2003
- Diffusion Barrier Deposition on a Copper Surface by Atomic Layer DepositionChemical Vapor Deposition, 2002
- Room temperature oxidation behavior of TiN thin filmsThin Solid Films, 1999
- Transmission Electron Microscopy1996