Mechanical Behavior and Crack Resistance of Modified Polydimethylsiloxane Impermeable Coating for Concrete Lining Subjected to Ultra-High Internal Pressure
Open Access
- 29 May 2025
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 15 (11) , 6132
Abstract
The high water head of some pumped storage power stations will induce the cracking of the concrete lining of their diversion tunnel and the leakage of high-pressure water, which will affect the safety of the tunnel and the surrounding rock. At present, there is no solution to the problem of impermeability of concrete materials after cracking. This paper proposes a composite lining to solve this problem. The composite lining with modified polydimethylsiloxane coating can effectively prevent high-pressure water, but its crack resistance needs to be further studied. Therefore, the tensile mechanical properties, constitutive relationship of modified polydimethylsiloxane impermeable coating, and the crack resistance mechanical properties of modified polydimethylsiloxane impermeable composite lining were studied by laboratory tests and numerical simulations. The results show that the true fracture elongation of the modified polydimethylsiloxane impermeable coating is as high as 118.98%, and its mechanical behavior can be described by a simplified polynomial hyperelastic constitutive model. The in situ stress will affect the crack width of the concrete lining. When the lateral pressure coefficient is less than 1, the crack width decreases with the increase in the lateral pressure coefficient. When the lateral pressure coefficient is greater than 1, the crack width increases with the increase in the lateral pressure coefficient. To prevent the cracking of modified polydimethylsiloxane coating, its spraying thickness needs to increase with the increase in crack width. The ratio of the coating’s thickness to crack width is recommended from 0.162 to 1.930 for internal water pressure from 1 MPa to 10 MPa, respectively. The suggestion provides a reference for designing the impermeable composite lining structure subjected to high internal water pressure.Keywords
Funding Information
- the Natural Science Foundation of Sichuan Province, China (2024NSFSC0836)
This publication has 26 references indexed in Scilit:
- Considerations on the existing capacity and future potential for energy storage in the European Union's hydropower reservoirs and pumped-storage hydropowerJournal of Energy Storage, 2024
- Role of pumped hydro storage plants for flood controlJournal of Energy Storage, 2024
- Development and characterization of polylactic acid/starch biocomposites – From melt blending to preliminary life cycle assessmentInternational Journal of Biological Macromolecules, 2024
- Elucidating the enduring transformations in cellulose-based carbon nanofibers through prolonged isothermal treatmentInternational Journal of Biological Macromolecules, 2024
- Strength and durability that last—Mechanical properties of polyurea and polyurethane coated compositesPolymer Composites, 2023
- An abrasion-resistant, photothermal, superhydrophobic anti-icing coating prepared by polysiloxane-modified carbon nanotubes and fluorine-silicone resinColloids and Surfaces A: Physicochemical and Engineering Aspects, 2022
- Mechanical behaviors and equivalent configuration of a polyurea under wide strain rate rangeComposite Structures, 2019
- Using split Hopkinson pressure bars to perform large strain compression tests on polyurea at low, intermediate and high strain ratesInternational Journal of Impact Engineering, 2009
- Stress–strain behavior of a polyurea and a polyurethane from low to high strain ratesPolymer, 2007
- Constitutive model for stretch-induced softening of the stress?stretch behavior of elastomeric materialsJournal of the Mechanics and Physics of Solids, 2004