Investigating Polymer Fibre Optics for Condition Monitoring of Synthetic Mooring Lines
Open Access
- 9 February 2020
- journal article
- research article
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 8 (2) , 103
Abstract
Synthetic mooring lines are becoming a popular alternative to conventional chain mooring systems. For marine renewable energy devices, they have been considered as an enabling technology for this nascent sector, given their reduced costs and ease of deployment. However, the extreme operating environment has led to an increased interest in the ‘in-situ’ condition monitoring of these mooring lines. This paper considers the use of polymer fibre optic technology and the optical time domain reflectometry (OTDR) technique for the condition monitoring of synthetic mooring lines. To establish the operating envelope of the fibres, Polymethylmethacrylate (PMMA) polymer optical fibres are mechanically tested. Additionally, an OTDR is used to monitor fibres whilst under elongation using a tensile test machine, and the sensitivity of the system in monitoring strain is established. At the lowest strain rate, the average proportional limit and yield points of the fibres are found at 1.16% strain and 5.41% strain, respectively. Fatigue exposure of fibres up to 1.25% strain identifies no measurable effect on fibres’ proportional limit or yield point. The occurrence of significant creep is identified for fibres strained beyond 1.5%. The OTDR system is able to identify strains at and above 4%. The study identifies important criteria that should be considered in the integration of polymer optical fibres for mooring applications. Limitations are discussed and suggestions for progressing this technology are provided.Keywords
Funding Information
- Engineering and Physical Sciences Research Council (EP/P008682/1)
This publication has 31 references indexed in Scilit:
- Synthetic mooring ropes for marine renewable energy applicationsRenewable Energy, 2015
- A Novel Mooring Tether for Highly-Dynamic Offshore Applications; Mitigating Peak and Fatigue Loads via Selectable Axial StiffnessJournal of Marine Science and Engineering, 2015
- Fibre Bragg grating sensors in polymer optical fibresMeasurement Science and Technology, 2015
- Optical Sensors Based on Plastic FibersSensors, 2012
- Bragg grating in a polymer optical fibre for strain, bend and temperature sensingMeasurement Science and Technology, 2010
- Polymer Optical Fiber Sensors for Distributed Strain Measurement and Application in Structural Health MonitoringIEEE Sensors Journal, 2009
- The role of viscoelastic properties in strain testing using microstructured polymer optical fibres (mPOF)Measurement Science and Technology, 2009
- Large Deformation In-Fiber Polymer Optical Fiber SensorIEEE Photonics Technology Letters, 2008
- Sensing characteristics of plastic optical fibres measured by optical time-domain reflectometryMeasurement Science and Technology, 2004
- Fiber optic sensors in concrete structures: a reviewSmart Materials and Structures, 1996