Effect of Gas Pressure and Stand-Off Distance on the Properties of Cold Sprayed Zinc on Steel Substrate
Open Access
- 1 May 2025
- journal article
- Published by Academic World Research in Journal of Advanced Materials In Engineering
- Vol. 44 (2) , 37-48
Abstract
Introduction and Objectives: The properties of coatings deposited by cold spray depend on the parameters of the process. The aim of this research is to investigate the effect of gas pressure and stand-off distance of cold spray process of zinc on a low carbon steel substrate.Materials and Methods: In this research, zinc powder was sprayed at pressures of 20 and 30 bar and stand-off distances of 20 and 30 mm. The microstructure of the coatings was investigated using optical and scanning electron microscope and the micro-hardness of the coatings was measured. Then, the selected coating and steel substrate were subjected to polarization corrosion test.Results: The results showed that increasing the gas pressure from 20 to 30 bar decreased the porosity and increased the micro-hardness due to further deformation. Also, for a constant pressure, the stand-off distance of 20 mm has the lowest porosity and the highest micro-hardness due to the higher temperature of the particles when impact the substrate. The results obtained from the polarization test show that the coating has a sacrificial nature compared to the substrate and reduces the corrosion current density by 48% and corrosion rate by 33% compared to the substrate.Conclusion: In this study, the effect of gas pressure and stand-off distance of cold spray process of zinc on low carbon steel substrate was investigated. The results showed that increasing the gas pressure from 20 to 30 bar and reducing the stand-off distance from 30 to 20 mm improved porosity and increased coatings micro-hardness. The results of this study can be used to optimize the parameters of the cold spraying of zinc for use in various industries such as automotive, power plants and marine infrastructure.Keywords
This publication has 33 references indexed in Scilit:
- Effects of Different Grit Blasting Environments on the Prepared Steel SurfaceJournal of Thermal Spray Technology, 2023
- Effects of Post-spray Heat Treatment on Hardness and Wear Properties of Ti-WC High-Pressure Cold Spray CoatingsJournal of Thermal Spray Technology, 2018
- Review of Relationship Between Particle Deformation, Coating Microstructure, and Properties in High-Pressure Cold SprayJournal of Thermal Spray Technology, 2017
- Cold spraying – A materials perspectiveActa Materialia, 2016
- The Corrosion Behavior of Cold Sprayed Zinc Coatings on Mild Steel SubstrateJournal of Thermal Spray Technology, 2013
- Effect of impact-induced melting on interface microstructure and bonding of cold-sprayed zinc coatingApplied Surface Science, 2010
- Bonding Mechanisms in Cold Spraying: The Contributions of Metallurgical and Mechanical ComponentsJournal of Thermal Spray Technology, 2009
- Effect of Substrate Temperature on the Formation Mechanism of Cold-Sprayed Aluminum, Zinc and Tin CoatingsJournal of Thermal Spray Technology, 2007
- Effect of Process Parameters and Heat Treatments on Properties of Cold Sprayed Copper CoatingsJournal of Thermal Spray Technology, 2007
- Development of a generalized parameter window for cold spray depositionActa Materialia, 2006