Morphology and crystallization behavior of the PP/PET nanocomposites
- 26 September 2008
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 111 (1) , 29-36
Abstract
Nanocomposites containing polypropylene (PP), PET, and montmorillonite were prepared in a twin‐screw extruder. X‐ray diffraction, transmission electron microscopy, scanning electron microscopy, atomic force microscopy, polarized optical microscopy, and differential scanning calorimetry were used to characterize the samples. Intercalated and exfoliated morphology were observed in the nanocomposites. The PET domains usually presented spherical shapes and they were the start point to PP crystallization. The average diameter and number of PET domains was evaluated. The influence of addition of PP‐MA as compatibilizer on PP/PET was investigated. The interconnected morphology was observed in the nanocomposite containing PP‐MA. The clay located predominantly in the interphase and in the PET phase. The crystallization process was monitored and the PET crystallization rate was slower in the nanocomposites. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009Keywords
This publication has 22 references indexed in Scilit:
- Quantitative estimation of the reinforcing effect of layered silicates in PP nanocompositesPolymer, 2006
- Preparation and mechanical properties of PP/PP-g-MA/Org-MMT nanocomposites with different MA contentPolymer Bulletin, 2006
- Characterization and thermal degradation of polypropylene–montmorillonite nanocompositesPolymer Degradation and Stability, 2006
- Poly(ethylene-co-vinyl acetate)/clay nanocomposites: Effect of clay nature and organic modifiers on morphology, mechanical and thermal propertiesPolymer Degradation and Stability, 2005
- Thermal and anticorrosive properties of polyurethane/clay nanocompositesJournal of Polymer Research, 2005
- Recycled poly(ethylene terephthalate)/layered silicate nanocomposites: morphology and tensile mechanical propertiesPolymer, 2004
- Polymer/layered silicate nanocomposites: a review from preparation to processingProgress in Polymer Science, 2003
- Effect of melt processing conditions on the extent of exfoliation in organoclay-based nanocompositesPolymer, 2001
- Polypropylene/Montmorillonite Nanocomposites. Review of the Synthetic Routes and Materials PropertiesChemistry of Materials, 2001
- Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materialsMaterials Science and Engineering: R: Reports, 2000