Fatigue life prediction and failure analysis of a gas turbine disc using the finite‐element method
Authors:
- R. A. CláudioRCR. A. Cláudio
- J. ByrneJBJ. Byrne
- 6 August 2004
- journal article
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 27 (9) , 849-860
Abstract
A numerical prediction of the life of a gas turbine model disc by means of the finite‐element technique is presented and the solution is compared with an experimental rim‐spinning test. The finite‐element method was used to obtain the K solution for a disc with two types of cracks, both at the notch root of the blade insert and located in the corner and in the centre. A crack aspect ratio of (a/c) = 1 was assumed. The fracture mechanics parameters J‐integral and K were used in the assessment, which were computed with linear elastic and elastic–plastic material behaviour. Using a crack propagation program with appropriate fatigue‐creep crack growth‐rate data, previously obtained in specimens for the nickel‐based superalloy IN718 at 600 °C, fatigue life predictions were made. The predicted life results were checked against experimental data obtained in real model discs. The numerical method, based on experimental fatigue data obtained in small laboratory specimens, shows great potential for development, and may be able to reduce the enormous costs involved in the testing of model and full‐size components.Keywords
This publication has 8 references indexed in Scilit:
- Influence of stress state on high temperature fatigue crack growth in Inconel 718Fatigue & Fracture of Engineering Materials & Structures, 2001
- High temperature fatigue crack growth in Inconel 718Materials at High Temperatures, 2000
- Prediction of crack growth from bolt holes in a discInternational Journal of Fatigue, 2000
- Calcium and EMFs: Graphing the DataScience, 1999
- Fatigue crack growth resistant microstructures in polycrystalline Ni-base superalloys for aeroenginesInternational Journal of Fatigue, 1999
- An empirical stress intensity factor set of equations for a semi-elliptical crack in a semi-infinite body subjected to a polynomial stress distribution.International Journal of Fatigue, 1999
- Crack growth under constant sustained load at elevated temperature in IN718 superalloyMaterials at High Temperatures, 1999
- Elevated Temperature Fatigue Crack Growth of Nickel Base Superalloys; A Review and Modelling1996