Hyperbranched Polyether as a Modifying Agent for Urea-Formaldehyde Resins—Hardness and Strength Control Tool
- 4 January 2007
- journal article
- research article
- Published by Taylor & Francis in International Journal of Polymeric Materials and Polymeric Biomaterials
- Vol. 56 (4) , 453-460
Abstract
A commercially available urea-formaldehyde (UF) resin was blended with a hyperbranched polyether (HBP) obtained from glycerol being a by-product in biodiesel production. The mechanical properties of the cured polymeric blends are described in this article. It was found that low addition (3 wt%) of the modifier significantly improves the hardness (16%) and the compressive shear strength (17%) of the polymer, whereas water absorption remains unaffected. It was also shown that blending UF resins with hyperbranched polyethers can be an effective tool for controlling mechanical properties and dimensional stability of the polymeric systems.Keywords
This publication has 13 references indexed in Scilit:
- Improved Water Resistance and Adhesive Performance of a Commercial UF Resin Blended with GlutaraldehydeThe Journal of Adhesion, 2006
- Hyperbranched aliphatic polyethers obtained from environmentally benign monomer: glycerol carbonateGreen Chemistry, 2005
- Synthesis of urea-formaldehyde oligomers without a solventRussian Journal of Applied Chemistry, 2004
- Toughening of vinylester–urethane hybrid resins by functional liquid nitrile rubbers and hyperbranched polymersPolymer, 2002
- A review of dendritic hyperbranched polymer as modifiers in epoxy compositesComposites Science and Technology, 2001
- Behavior of amine‐modified urea–formaldehyde‐bonded wood joints at low formaldehyde/urea molar ratiosJournal of Applied Polymer Science, 1994
- Polyamine‐modified urea–formaldehyde‐bonded wood joints. III. Fracture toughness and cyclic stress and hydrolysis resistanceJournal of Applied Polymer Science, 1993
- True linear polymerization shrinkage of unfilled resins and composites determined with a linometerDental Materials, 1993
- Polyamine‐modified urea‐formaldehyde resins. II. Resistance to stress induced by moisture cycling of solid wood joints and particleboardJournal of Applied Polymer Science, 1991
- Beständigkeit von Carbamid- und Phenolharzverleimungen bei HolzspanplattenEuropean Journal of Wood and Wood Products, 1966