Thermomechanical fatigue of 1.4849 cast steel – experiments and life prediction using a fracture mechanics approach
Authors:
- 1 August 2010
- journal article
- Published by Walter de Gruyter GmbH in International Journal of Materials Research
- Vol. 101 (8) , 942-950
Abstract
In this paper the thermomechanical fatigue properties of 1.4849 cast steel, which is used for exhaust manifolds and turbochargers, are investigated and a fracture mechanics based approach is used for fatigue life prediction. Isothermal low-cycle fatigue tests and thermomechanical fatigue tests are conducted in the temperature range from room temperature up to 1 000 °C. Fractographic investigations show that fracture occurs predominantly intergranularly at 600 °C, whereas mixed transgranular and intergranular crack growth is found otherwise. The methodology for fatigue life prediction is based on a time and temperature dependent cyclic plasticity model, which describes the transient stresses and strains, and on a law for time and temperature dependent microcrack growth. The crack growth law assumes that the increment in crack length in each cycle, da/dN, is correlated with the cyclic crack-tip opening displacement, δCTOD. An analytical fracture mechanics based estimate of δCTOD is used, which is derived for non-isothermal loadings. The fatigue lives of the low-cycle and the thermomechanical fatigue tests are predicted well with the model. Only predictions for the low-cycle fatigue tests at 600 °C, where integranular fracture is predominant, are non-conservative.Keywords
This publication has 24 references indexed in Scilit:
- Lifetime simulation of thermo-mechanically loaded componentsMeccanica, 2006
- Deformation behaviour, short crack growth and fatigue livesunder multiaxial nonproportional loadingInternational Journal of Fatigue, 2006
- Thermo-mechanical fatigue behaviour of the γ-TiAl alloy TNB-V5Scripta Materialia, 2006
- Thermisch– mechanisches und isothermes Ermüdungsverhalten der Nickelbasis – Superlegierung IN 792 CCMaterialwissenschaft und Werkstofftechnik, 1997
- Thermomechanical fatigue life prediction in gas turbine superalloys - A fracture mechanics approachAIAA Journal, 1995
- Thermomechanical fatigue, oxidation, and Creep: Part II. Life predictionMetallurgical Transactions A, 1989
- Thermomechanical fatigue, oxidation, and creep: Part i. Damage mechanismsMetallurgical Transactions A, 1989
- Fracture at High Temperatures1987
- The extension of the J-integral concept to fatigue cracksInternational Journal of Fracture, 1982
- Low-Cycle Fatigue Damage Mechanisms at High Temperature1979