An elaboration on the shear characterization of dry woven fabrics using trellising tests
Authors:
- 7 February 2013
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 34 (3) , 359-367
Abstract
Material characterization of woven fabric composites in dry form is one of the most crucial steps prior to the design and optimization of composite manufacturing processes. High stiffness of yarns under axial tension and low stiffness under in‐plane shear makes the latter the dominant deformation mode during draping of woven fabrics. Bias‐extension (BE) and shear frame (SF) tests are two widely used experimental setups for the characterization of woven fabrics under the shear (also called trellising) mode. This article outlines two general approaches for the characterization and normalization of data collected from the above standard tests. The first approach is based on the total energy absorbed by the fabric specimen along with the total work induced by the external force on the moving head of the tensile test machine. The second approach uses a variational formulation along with the principle of virtual work. Using both approaches, it is shown how, in the BE test, an auxiliary specimen with a different aspect ratio can be used to cope with the problem of nonuniform deformation (formation of three different shear regions) in the specimens. To illustrate the application of both methods, they are applied to predict in‐plane shear stiffness of a glass/PP plain weave under SF and BE tests. It is suggested that the shear stress can be used as a normalized parameter to compare data from different trellising tests. POLYM. COMPOS., 2013. © 2013 Society of Plastics EngineersKeywords
This publication has 17 references indexed in Scilit:
- Normalization of Shear Test Data for Rate-independent Compressible FabricsJournal of Composite Materials, 2008
- Characterization of mechanical behavior of woven fabrics: Experimental methods and benchmark resultsComposites Part A: Applied Science and Manufacturing, 2008
- Decrimping Behavior of Uncoated Plain-woven Fabrics Subjected to Combined Biaxial Tension and Shear StressesTextile Research Journal, 2007
- Importance of in-plane shear rigidity in finite element analyses of woven fabric composite preformingComposites Part A: Applied Science and Manufacturing, 2006
- Measurement of meso-scale shear deformations for modelling textile compositesComposites Part A: Applied Science and Manufacturing, 2006
- A continuum mechanics-based non-orthogonal constitutive model for woven composite fabricsComposites Part A: Applied Science and Manufacturing, 2005
- Shear characterisation of viscous woven textile composites: a comparison between picture frame and bias extension experimentsComposites Science and Technology, 2004
- Evaluation of bias-extension and picture-frame test methods for the measurement of intraply shear properties of PP/glass commingled fabricsComposite Structures, 2003
- An approach in modeling the temperature effect in thermo-stamping of woven compositesComposite Structures, 2003
- Meso/macro-mechanical behaviour of textile reinforcements for thin compositesComposites Science and Technology, 2001