Nanometer-Thin Pure B Layers Grown by MBE as Metal Diffusion Barrier on GaN Diodes
- 1 March 2019
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Abstract
Pure boron layers, deposited by molecular beam epitaxy (MBE) on AlGaN/GaN/p-Si substrates to a thickness of ~ 7 nm, were applied as barriers to aluminum metallization. For low-temperature deposition from 250°C - 400°C, low-saturation-current diodes to the n-type GaN were fabricated that all tolerated alloying at 400°C. After alloying, the relatively high current level of the 250°C diode was reduced to that of the other low temperature diodes, whereas 700°C B deposition resulted in high-current diode characteristics. The results suggest a favorable B-to-GaN chemistry at 350°C - 400°C.Keywords
This publication has 8 references indexed in Scilit:
- Nanometer-Thin Pure Boron Layers as Mask for Silicon MicromachiningJournal of Microelectromechanical Systems, 2017
- Electrical properties of planar AlGaN/GaN Schottky diodes: Role of 2DEG and analysis of non-idealitiesJournal of Applied Physics, 2017
- Sheet resistance under Ohmic contacts to AlGaN/GaN heterostructuresApplied Physics Letters, 2014
- Robust UV/VUV/EUV PureB Photodiode Detector Technology With High CMOS CompatibilityIEEE Journal of Selected Topics in Quantum Electronics, 2014
- High-Efficiency Silicon Photodiode Detector for Sub-keV Electron MicroscopyIEEE Transactions on Electron Devices, 2012
- The microscopic mechanism of silicon precipitation in Al/Si systemMaterials Science and Engineering: A, 2006
- Applicability of ALE TiN films as Cu/Si diffusion barriersThin Solid Films, 2000
- A study of the failure mechanism of a titanium nitride diffusion barrierJournal of Applied Physics, 1999