Biofilm formation of mixed Candida albicans and methicillin-sensitive Staphylococcus aureus and surface properties of a 3D-printed denture base resin under different printing parameters
Open Access
- 1 January 2026
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Journal of Applied Oral Science
- Vol. 34, e20250526
Abstract
Objective To evaluate the formation of mixed-species biofilms of Candida albicans and methicillin-sensitive Staphylococcus aureus (MSSA) on the surface of a 3D-printed denture base resin, as well as its surface properties, under varying printing parameters. Methodology Discs (n=40 per group, 10×1.2 mm) of a denture base resin (priZma 3D Bio Denture) were fabricated using two 3D-printers—Liquid Crystal Display (LCD) and Digital Light Processing (DLP)—at three different angles (0°, 45°, or 90°). Surface roughness was measured using a digital profilometer and expressed as Ra (µm). For surface energy (SE) analysis, contact angles were measured using a tensiometer. Discs were incubated at 37 °C for 90 minutes and 48 hours to enable biofilm formation using C. albicans and MSSA inocula. Cell viability was assessed by colony-forming unit (CFU/mL) counts, and metabolic activity was evaluated using the XTT assay (absorbance). Microbial counts and XTT results were analyzed by three-way ANOVA (printer type, printing angle, incubation period). Surface roughness was analyzed by two-way ANOVA (printer type, printing angle), with Tukey’s test and a significance level of 0.05. Results For both CFU/mL and XTT assays, incubation period was the only significant factor (p0.05). Surface roughness was significantly influenced by printer type, printing angle, and their interaction (p=0.027). The LCD 0° and LCD 90° groups produced smoother surfaces compared with LCD 45° (p=0.002), which showed similar values to all DLP groups regardless of angle (p>0.05). The DLP printer did not show significant roughness variations across the tested angles (p>0.05). The LCD groups presented numerically lower SE values compared to the DLP groups. Conclusion The LCD system performs better than DLP in reducing surface roughness at 0° and 90°. Moreover, the analyzed factors did not significantly affect microbial adhesion or the formation of mixed-species biofilms.Keywords
Funding Information
- Fundação de Amparo à Pesquisa do Estado de São Paulo (2024/01694-0)
- Fundação de Amparo à Pesquisa do Estado de São Paulo (2022/14657-0)
- Fundação de Amparo à Pesquisa do Estado de São Paulo (2024/01694-0)
- Fundação de Amparo à Pesquisa do Estado de São Paulo (2022/14657-0)
This publication has 40 references indexed in Scilit:
- Is microbial adhesion affected by the build orientation of a 3-dimensionally printed denture base resin?The Journal of Prosthetic Dentistry, 2023
- Assessing the physical and mechanical properties of 3D printed acrylic material for denture base applicationDental Materials, 2022
- Effect of post-curing light exposure time on the physico–mechanical properties and cytotoxicity of 3D-printed denture base materialDental Materials, 2022
- Comparison of flexural properties and cytotoxicity of interim materials printed from mono-LCD and DLP 3D printersThe Journal of Prosthetic Dentistry, 2021
- Printing accuracy, mechanical properties, surface characteristics, and microbial adhesion of 3D-printed resins with various printing orientationsThe Journal of Prosthetic Dentistry, 2020
- Objects build orientation, positioning, and curing influence dimensional accuracy and flexural properties of stereolithographically printed resinDental Materials, 2018
- Candida albicans biofilms: development, regulation, and molecular mechanismsMicrobes and Infection, 2016
- Advancements in CAD/CAM technology: Options for practical implementationJournal of Prosthodontic Research, 2016
- Biofilm formation by oral clinical isolates of Candida speciesArchives of Oral Biology, 2013
- Quantitative analysis of adhesion and biofilm formation on hydrophilic and hydrophobic surfaces of clinical isolates of Staphylococcus epidermidisResearch in Microbiology, 2005