Cantilever effects on the measurement of electrostatic potentials by scanning Kelvin probe microscopy
Authors:
- 23 July 2001
- journal article
- Published by AIP Publishing in Applied Physics Letters
- Vol. 79 (4) , 545-547
Abstract
Scanning Kelvin probe microscopy (SKPM) is a unique way to measure electrostatic potentials for small geometries. It has numerous applications including characterization of integrated circuits and nanoscale devices. SKPM is attractive because of the quantitative nature of the measurements. In this work, we have examined one of the principal sources of measurement error, the cantilever (which holds the probe tip). The accuracy of measurements of electrostatic potentials on closely spaced regions biased differently is reduced due to a large capacitance gradient associated with the cantilever. However, it is observed that the accuracy of measurements increases as the tip–sample distance is decreased because the capacitance gradient of the tip becomes proportionally larger relative to that of the cantilever. It is further observed that longer tips with smaller cantilever areas measure the electrostatic potentials more accurately as the capacitance gradient of the cantilever is reduced. Scanning probe tips are parametrized by a factor R, which indicates their suitability for SKPM measurements.Keywords
This publication has 8 references indexed in Scilit:
- Surface potential measurements on GaN and AlGaN/GaN heterostructures by scanning Kelvin probe microscopyJournal of Applied Physics, 2001
- Investigation of the cleaved surface of a p–i–n laser using Kelvin probe force microscopy and two-dimensional physical simulationsApplied Physics Letters, 2000
- Van der Waals and capacitive forces in atomic force microscopiesJournal of Applied Physics, 1999
- Resolution and contrast in Kelvin probe force microscopyJournal of Applied Physics, 1998
- Electrostatic forces acting on the tip in atomic force microscopy: Modelization and comparison with analytic expressionsJournal of Applied Physics, 1997
- Kelvin probe force microscopy for characterization of semiconductor devices and processesJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1996
- Capacitive effects on quantitative dopant profiling with scanned electrostatic force microscopesJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1996
- Silicon pn junction imaging and characterizations using sensitivity enhanced Kelvin probe force microscopyApplied Physics Letters, 1995