Experimental Investigation of the Loading Strategy of an Automotive Diesel Engine under Transient Operation Conditions
Open Access
Abstract
Targeting the performance optimization of an automotive diesel engine under transient operation conditions, in this research, the effect of several non-linear loading strategies on diesel performance have been experimentally analyzed using a heavy-duty turbocharged diesel engine running under transient conditions based on the constant 1650 r/min speed, the load is increased from 10% to 100% in a 5 s transition time The results show that the larger the early loading rate and change point load, the better the dynamic torque response. The peak values of smoke and CO and the transient average of brake specific fuel consumption (BSFC), soot and CO can be decreased by increasing the early loading rate by the loading strategies with the appropriate change point load during transient operation. However, combustion deteriorates under the loading process with an overlarge change point load, causing emissions to increase, and the larger the early loading rate, the worse the worsening. Based on the trade-off consisting of torque dynamic response, transient total and transient average of the BSFC and brake specific emissions, peak values of smoke and CO emissions, it is concluded that the loading strategy with the early loading rate is the 50% load per second and the change point load in the 25% load is the most suitable in these strategies.Keywords
Funding Information
- the National Key R&D Program of China (Grant No.2017YFB0103503)
- National Natural Science Foundation of China (Grant No.51576089)
This publication has 21 references indexed in Scilit:
- Investigation of transient deterioration mechanism and improved method for turbocharged diesel engineEnergy, 2016
- Effects of diesel injection parameters on the rapid combustion and emissions of an HD common-rail diesel engine fueled with diesel-methanol dual-fuelApplied Thermal Engineering, 2016
- Effect of fuel injection pressure and injection timing of Karanja biodiesel blends on fuel spray, engine performance, emissions and combustion characteristicsEnergy Conversion and Management, 2015
- Investigation of in-cylinder gas stratification of diesel engine during intake and compression strokeEnergy, 2014
- Review on characterization of nano-particle emissions and PM morphology from internal combustion engines: Part 2International Journal of Automotive Technology, 2014
- Wall-wetting model based method for air-fuel ratio transient control in gasoline engines with dual injection systemInternational Journal of Automotive Technology, 2013
- Nano-particle emission characteristics of European and Worldwide Harmonized test cycles for heavy-duty diesel enginesInternational Journal of Automotive Technology, 2011
- Assessment of diesel combustion noise overall level in transient operationInternational Journal of Automotive Technology, 2009
- Evaluation of the effect of engine, load and turbocharger parameters on transient emissions of diesel engineEnergy Conversion and Management, 2009
- Strategies for improving the mode transition in a sequential parallel turbocharged automotive diesel engineInternational Journal of Automotive Technology, 2009