Determination of Manufacturing Conditions for Hot-Gas-Aided Thermoplastic Tape Winding
Authors:
- S. K. MazumdarSMS. K. Mazumdar
- 1 January 1996
- journal article
- Published by SAGE Publications in Journal of Thermoplastic Composite Materials
- Vol. 9 (1) , 35-53
Abstract
Carbon/PEEK (APC-2) thermoplastic composite rings are manufactured by the thermoplastic tape winding process using hot nitrogen gas as a heat source. In the tape winding process, localized melting causes a high rate of heating and cooling, which demands different manufacturing conditions from hot pressing and autoclave processing. Heating rate and cooling rate are found to be more than 20,0000C/min and 5,0000C/min, respectively, and melt time is found to be in the range of 1 to 4 seconds for hot gas processing. Shorter melt times and higher heating rate during the on-line consolidation process require higher processing temperatures (greater than 600'C) for sufficient molecular interdiffusion. Higher molecular interdiff-usion would produce better interlaminar properties. During the production of thermoplastic composite parts using the thermoplastic tape winding process, several parameters such as heat intensity, tape speed, consolidation pressure, preheating temperature of tape and tool material, and cooling rate can affect the properties of an end product. A judicious selection of such parameters can produce a composite part which has fewer voids, better consolidation, minimum residual stress, desired crystallinity and high quality. Effects of dominant processing parameters such as heat intensity, tape speed, and consolidation pressure on temperature distribution, processinduced deformation, quality of consolidation, and crystallinity are examined.Keywords
This publication has 14 references indexed in Scilit:
- Issues Related to Processability during the Manufacture of Thermoplastic Composites Using On-Line Consolidation TechniquesJournal of Thermoplastic Composite Materials, 1993
- Thermal Analysis of in-situ Thermoplastic Composite Tape LayingJournal of Thermoplastic Composite Materials, 1991
- Design and Fabrication of an On-Line Consolidation Facility for Thermoplastic CompositesJournal of Thermoplastic Composite Materials, 1989
- The thermal stability of poly(aryl‐ether–ether‐ketone) as assessed by thermogravimetryJournal of Applied Polymer Science, 1989
- Test methodology for the determination of optimum fusion welding conditions of polyethyleneJournal of Applied Polymer Science, 1989
- Effects of thermal history on crystallization of poly(ether ether ketone) (PEEK)Macromolecules, 1988
- Thermal Analysis of Laser-Assisted Thermoplastic-Matrix Composite Tape ConsolidationJournal of Heat Transfer, 1988
- Heat transfer effects on the processing‐structure relationships of polyetheretherketone (PEEK) based compositesPolymer Engineering & Science, 1988
- Experimental Investigation of Laser-Assisted Thermoplastic Tape ConsolidationJournal of Thermoplastic Composite Materials, 1988
- Crystallization kinetics of polyetheretherketone (peek) matricesPolymer Engineering & Science, 1986