Plasma Modification of PDMS Microfluidic Devices for Control of Electroosmotic Flow
- 22 May 2007
- journal article
- research article
- Published by Wiley in Plasma Processes and Polymers
- Vol. 4 (4) , 414-424
Abstract
Polydimethylsiloxane (PDMS) capillary electrophoresis microchips were modified using plasma‐enhanced chemical vapor deposition (PECVD), resulting in modified electroosmotic flow (EOF) values. Octafluoropropane (C3F8) and acrylic acid (AA) plasmas were chosen as initial test systems for device modification. Argon plasma pretreatments were used to improve adhesion of the fluorocarbon (FC) and AA films. Contact angle measurements and X‐ray photoelectron spectroscopy data demonstrated that the Ar/C3F8 plasma treatment of PDMS results in the deposition of a hydrophobic, crosslinked FC film, whereas the Ar/AA plasma treatment results in the deposition of a hydrophilic film with ionizable acid groups. The extent of plasma modification within the device channels was explored using scanning Auger microscopy and dye absorption measurements. EOF values were measured for plasma‐treated chips as a function of pH, and aging studies were performed to determine the durability of the plasma treatments. Results show that EOF is decreased in Ar/C3F8 plasma‐treated chips, and varies less with pH than untreated devices. Additionally, EOF measurements are constant for a minimum of 5 d. In contrast, EOF for Ar/AA plasma‐treated devices is dependent on pH. EOF measurements of C3F8 and AA treated chips without the Ar pretreatment are less stable, particularly in the AA case. In addition to improving adhesion, the Ar plasma treatment results in a decreased hydrophobic dye absorption into the PDMS, which is attributed to the physical crosslinking of the polymer by the Ar plasma. magnified imageKeywords
This publication has 35 references indexed in Scilit:
- Determination of Nonsteroidal Anti‐inflammatory Drugs in Serum by Microchip Capillary Electrophoresis with Electrochemical DetectionElectroanalysis, 2006
- Use of plasma polymerisation process for fabrication of bio-MEMS for micro-fluidic devicesApplied Surface Science, 2005
- Surface Modification of the Channels of Poly(dimethylsiloxane) Microfluidic Chips with Polyacrylamide for Fast Electrophoretic Separations of ProteinsAnalytical Chemistry, 2004
- UV/ozone modification of poly(dimethylsiloxane) microfluidic channelsSensors and Actuators B: Chemical, 2004
- Cross‐linked coatings for electrophoretic separations in poly(dimethylsiloxane) microchannelsElectrophoresis, 2003
- Low temperature plasma treatment of asymmetric polysulfone membranes for permanent hydrophilic surface modificationJournal of Membrane Science, 2001
- From Micro- to Nanofabrication with Soft MaterialsScience, 2000
- Dual-Electrode Electrochemical Detection for Poly(dimethylsiloxane)-Fabricated Capillary Electrophoresis MicrochipsAnalytical Chemistry, 2000
- Rapid Prototyping of Microfluidic Systems in Poly(dimethylsiloxane)Analytical Chemistry, 1998
- Plasma Polymerization of Fluorocarbons1990