Non-destructive detection and analysis of weld defects in dissimilar pulsed GMAW and FSW joints of aluminium castings and plates through 3D X-ray computed tomography
Open Access
- 6 April 2024
- journal article
- research article
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 132 (5-6) , 2957-2970
Abstract
This work focuses on porosity formation during the welding of dissimilar aluminium alloys (cast and sheet) by pulsed gas metal arc welding (GMAW) with different travel speeds (12–14 mm/s) and by friction stir welding (FSW). The case study concerns the assembling of a battery-pack enclosure prototype. The welded specimens were scanned by 3D X-ray computed tomography. The cast base material (BM) shows a porosity percentage of 1.45%, and it is characterized by pores with a strong hyperbolic relationship between equivalent diameter and sphericity. Considering the GMAW beads, porosity rises with the travel speed (from 1.80 to 5.12%), due to the reduction of the opening window in which pores can escape. Pores with volume higher than 0.10 mm3 rise with the travel speed, representing from 9.75 to 32.98% of the total porosity. These pores are responsible for the weaker hyperbolic connection for sphericity found for the GMAW beads. On the other hand, FSW mixes and homogenizes the pores in the cast BM. The novelty of the paper lays in proving the strong potentialities of FSW for weld porosity reduction. A re-designing of the battery-pack enclosures is necessary to limit arc welding in marginal areas, which are not crucial for sealing but necessary to create a stable platform to be subsequently sealed with FSW.Keywords
Funding Information
- Politecnico di Torino
This publication has 37 references indexed in Scilit:
- Pre-hole friction stir spot welding of dual-phase steels and comparison with resistance spot welding, conventional and pinless friction stir spot weldingThe International Journal of Advanced Manufacturing Technology, 2023
- Breaking it down: A techno-economic assessment of the impact of battery pack design on disassembly costsApplied Energy, 2022
- Study of micro-porosity in electron beam butt weldingThe International Journal of Advanced Manufacturing Technology, 2022
- Avoiding structural redundancies between the vehicle body and the battery housing based on a functional integration approachAutomotive and Engine Technology, 2022
- A different attempt to improve the formability of aluminum tailor welded blanks (TWB) produced by the FSWInternational Journal of Material Forming, 2021
- Comparison of the Weldability of AA6061-T6 Joint under Different Friction Stir Welding ConditionsJournal of Materials Engineering and Performance, 2021
- Pulse MIG Welding of 6061-T6/A356-T6 Aluminum Alloy Dissimilar T-jointJournal of Materials Engineering and Performance, 2018
- Effect of Shielding Gas on the Properties of AW 5083 Aluminum Alloy Laser Weld JointsJournal of Materials Engineering and Performance, 2018
- Design optimization of battery pack enclosure for electric vehicleStructural and Multidisciplinary Optimization, 2018
- Investigation on effects of process parameters on porosity in dissimilar Al alloy lap fillet weldsThe International Journal of Advanced Manufacturing Technology, 2015