Interlaminar fracture toughness of carbon/epoxy composites laminates toughened by short carbon fiber
Authors:
- 8 June 2023
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 44 (8) , 5261-5271
Abstract
In this paper, short carbon fiber (SCF) interlaminar toughened carbon fiber reinforced epoxy resin (CF/EP) composite laminates were prepared. The effect of SCF content on the mode II interlaminar fracture toughness (GIIC) and flexural properties of CF/EP composites was investigated. It was shown that the addition of SCF between the plies had an effect on the GIIC of the composites. When the SCF content was 10 g/m2, the GIIC increased from 1506.62 J/m2 to 1995.6 J/m2, which improved by about 32.46%. When the content of SCF was 5 g/m2, the flexural strength and flexural modulus increased by 36.92% and 98.48%, respectively, showing the best performance. The toughening mechanism of SCF was observed by SEM images as SCF debonding and pulling out from the resin and SCF fracture. The present study was also compared with our previous study on short aramid fiber interlaminar toughened CF/EP composites, and the test data and SEM images of the two experiments were compared to analyze the effect of different short fibers on the interlaminar toughening effect, which provides some reference for the selection of interlaminar toughening materials.Keywords
This publication has 36 references indexed in Scilit:
- Experimental and theoretical study on the strain rate dependence of the mechanical properties of Twaron fiber tows with different fiber finenessTextile Research Journal, 2018
- Impact tensile behavior analysis of Twaron fiber tows from fast Fourier transformTextile Research Journal, 2018
- Influences of dispersion types and area densities of chopped fiber‐based interfacial reinforcements on mechanical properties of sandwich structuresPolymer Composites, 2018
- Assessment of delamination in composite materials: A reviewProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2016
- Improved Mode I fracture resistance of CFRP composites by reinforcing epoxy matrix with recycled short milled carbon fibreConstruction and Building Materials, 2016
- Improving the interlaminar fracture toughness of carbon/epoxy laminates by directly incorporating with porous carbon nanotube buckypaperJournal of Reinforced Plastics and Composites, 2015
- Improving interlaminar fracture toughness of flax fiber/epoxy composites with chopped flax yarn interleavingScience China Technological Sciences, 2015
- Interlaminar reinforcement of glass fiber/epoxy composites with graphene nanoplateletsComposites Part A: Applied Science and Manufacturing, 2015
- Impact and residual after impact properties of carbon fiber/epoxy composites modified with carbon nanotubesComposite Structures, 2014
- Improving interlaminar fracture toughness of carbon fibre/epoxy laminates by incorporation of nano-particlesComposites Part B: Engineering, 2012