Friction riveting (‘FricRiveting’) of 6056 T6 aluminium alloy and polyamide 6: influence of rotational speed on the formation of the anchoring zone and on mechanical performance
- 22 February 2017
- journal article
- research article
- Published by Taylor & Francis in Welding International
- Vol. 31 (7) , 509-518
Abstract
Metal-polymer hybrid structures can be used as an alternative solution for reducing weight and fuel consumption in the transport industry, which aims to minimise the emission of harmful gases that have a greenhouse effect. Friction riveting is a relatively new technique for joining metal-polymer hybrid structures. The process is based on the generation of frictional heat between the components, resulting in the plastic deformation of the end of the metal rivet, which is anchored inside the polymer component. This study assessed the technical feasibility of joining AA 6056 T6 and PA6, focusing on the influence of the rotational speed of the rivet on the mechanical performance of the joints. The maximum temperature reached during the process increased with the rotational speed, from 291 ± 6 °C with 10,000 rev/min to 375 ± 5 °C with 15,000 rev/min. The use of higher rotational speeds led to the tip of the rivet undergoing plastic deformation during the friction phase. This produced mechanically stronger joints, because the metal rivet was anchored more securely in the polymer block. The AA 6056 T6-PA6 joints perform well in terms of tensile strength, reaching 85% of the tensile strength of the metal rivet. We therefore confirmed that it is possible to join AA 6056 T6 and PA6 using the technique of friction riveting, and that rotational speed directly affects the tensile strength of the joints.Keywords
Funding Information
- Advanced Polymer-Metal Hybrid Structures (VH-NG-626)
This publication has 13 references indexed in Scilit:
- Friction Spot Joining of aluminum AA2024/carbon-fiber reinforced poly(phenylene sulfide) composite single lap joints: Microstructure and mechanical performanceMaterials & Design (1980-2015), 2014
- Friction Riveting of glass–fibre-reinforced polyetherimide composite and titanium grade 2 hybrid jointsMaterials & Design (1980-2015), 2013
- Mechanical and failure behaviour of hybrid polymer–metal staked jointsMaterials & Design (1980-2015), 2013
- Rebitagem por fricção ("FricRiveting"). Desenvolvimento de uma nova técnica de união para juntas híbridas do tipo polímero-metal. Parte II: propriedades térmicas e mecânicasSoldagem & Inspeção, 2011
- Automotive assembly technologies review: challenges and outlook for a flexible and adaptive approachCIRP Journal of Manufacturing Science and Technology, 2010
- Joining of polymers and polymer–metal hybrid structures: Recent developments and trendsPolymer Engineering & Science, 2009
- Thermal degradation of polyetherimide joined by friction riveting (FricRiveting). Part I: Influence of rotation speedPolymer Degradation and Stability, 2008
- Nylon–selected topicsJournal of Polymer Science Part A: Polymer Chemistry, 2001
- Adhesive bonding of aircraft structuresInternational Journal of Adhesion and Adhesives, 2000
- Stress analysis and strength prediction of mechanically fastened joints in FRP: a reviewComposites Part A: Applied Science and Manufacturing, 1997