Evaluation and prediction of carbon fiber–reinforced polymer cable anchorage for large capacity
Authors:
- 19 February 2019
- journal article
- research article
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 22 (8) , 1952-1964
Abstract
Aiming to address the problems of stress concentration on conical wedge anchorage, a fiber-reinforced polymer cable anchorage with segmental variable stiffness of the load transfer medium was proposed. The key parameters that affect the anchorage behavior were investigated. The mechanical properties of the carbon fiber–reinforced polymer tendon and load transfer medium were tested. The failure mode, anchoring efficiency, stress, and displacement in the anchor zone were studied. The parameter optimization was performed using an experimentally verified finite element simulation. The parameters of the anchorage system with large capacity were evaluated. The results demonstrate that the compressive strength of the load transfer medium is the designed stress limit for the anchorage system. The cable does not slip or become damaged in the anchor zone, and the anchoring efficiency reaches 91%. The distribution of the shear and radial stress on the cable surface is smooth, and the stress concentration is greatly relieved. The result of the finite element simulation is consistent with the experimental values when the friction coefficient is 0.15, and the material and geometric parameters of the anchorage system with cable forces of 5000, 10,000, 15,000, and 20,000 kN are suggested. The geometric parameters of the anchor system with diverse cable capacity can be preliminarily designed based on the fitting equations.Keywords
Funding Information
- National Natural Science Foundation of China (51678139)
- National Science and Technology Infrastructure Program (2017YFC0703006)
This publication has 22 references indexed in Scilit:
- Analysis of the construction process of cable-stayed bridges built on temporary supportsEngineering Structures, 2012
- Experimental and Numerical Study of the Fatigue Properties of Corroded Parallel Wire CablesJournal of Bridge Engineering, 2012
- Numerical Simulation and Experimental Validation of an Integrated Sleeve-Wedge Anchorage for CFRP RodsJournal of Composites for Construction, 2011
- Evaluation of FRP and hybrid FRP cables for super long-span cable-stayed bridgesComposite Structures, 2010
- Integrated high-performance thousand-metre scale cable-stayed bridge with hybrid FRP cablesComposites Part B: Engineering, 2010
- Anchor System for Tension Testing of Large Diameter GFRP BarsJournal of Composites for Construction, 2009
- Novel Anchor System for CFRP Rod: Finite-Element and Mathematical ModelsJournal of Composites for Construction, 2007
- A new steel anchorage system for post-tensioning applications using carbon fibre reinforced plastic tendonsCanadian Journal of Civil Engineering, 1998
- Connecting high-performance carbon-fiber-reinforced polymer cables of suspension and cable-stayed bridges through the use of gradient materialsJournal of Computer-Aided Materials Design, 1996
- Fatigue Resistance of Large‐Diameter Cable for Cable‐Stayed BridgesJournal of Structural Engineering, 1992