Scenarios and methods that induce protruding or released CNTs after degradation of nanocomposite materials
Open Access
- 6 March 2013
- journal article
- research article
- Published by Springer Nature in Journal of Nanoparticle Research
- Vol. 15 (4) , 1-15
Abstract
Nanocomposite materials may be considered as a low-risk application of nanotechnology, if the nanofillers remain embedded throughout the life-cycle of the products in which they are embedded. We hypothesize that release of free CNTs occurs by a combination of mechanical stress and chemical degradation of the polymer matrix. We experimentally address limiting cases: Mechanically released fragments may show tubular protrusions on their surface. Here we identify these protrusions unambiguously as naked CNTs by chemically resolved microscopy and a suitable preparation protocol. By size-selective quantification of fragments we establish as a lower limit that at least 95 % of the CNTs remain embedded. Contrary to classical fiber composite approaches, we link this phenomenon to matrix materials with only a few percent elongation at break, predicting which materials should still cover their CNT nanofillers after machining. Protruding networks of CNTs remain after photochemical degradation of the matrix, and we show that it takes the worst case combinations of weathering plus high-shear wear to release free CNTs in the order of mg/m2/year. Synergy of chemical degradation and mechanical energy input is identified as the priority scenario of CNT release, but its lab simulation by combined methods is still far from real-world validation. Graphical AbstractKeywords
This publication has 52 references indexed in Scilit:
- Effects of UV degradation on surface hydrophobicity, crack, and thickness of MWCNT-based nanocomposite coatingsProgress in Organic Coatings, 2011
- Gaseous effluents from the combustion of nanocomposites in controlled-ventilation conditionsJournal of Physics: Conference Series, 2011
- Determination of nanoparticle size distribution together with density or molecular weight by 2D analytical ultracentrifugationNature Communications, 2011
- Characterization and Control of Airborne Particles Emitted During Production of Epoxy/Carbon Nanotube NanocompositesJournal of Occupational and Environmental Hygiene, 2011
- Characterization of Exposures To Nanoscale Particles and Fibers During Solid Core Drilling of Hybrid Carbon Nanotube Advanced CompositesInternational Journal of Occupational and Environmental Health, 2010
- Effects of nanoparticle feed location during nanocomposite compoundingPolymer Engineering & Science, 2009
- Exposure to nanoscale particles and fibers during machining of hybrid advanced composites containing carbon nanotubesJournal of Nanoparticle Research, 2008
- Hydrodynamic Characterization of Surfactant Encapsulated Carbon Nanotubes Using an Analytical UltracentrifugeACS Nano, 2008
- On the tensile strength distribution of multiwalled carbon nanotubesApplied Physics Letters, 2005
- Degradation and stabilisation of polymers and coatings: nano versus pigmentary titania particlesPolymer Degradation and Stability, 2004